|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| N2O | Turbo | Superchargers Tech forum to assist in Honda/Acura Performance. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
not getting any oil return!!! help me out!
well i finally figured out why i was leaking oil from my turbo to my exhasut, for some reason the turbo is not returning the oil to the pan, its not my lines cause i took the turbo off and put oil into it and nothing is comming out, i dont know what would be blocking it off. anyone have an ideas?
__________________
GEISI DRIVE FAST AND TAKE CHANCES |
|
#2
|
|||
|
|||
|
Re: not getting any oil return!!! help me out!
how does the turbo spin ? any shaft play ? is it a used turbo ?
and i remember your other post and i told you to make sure oil was coming out of the oil return |
|
#3
|
|||
|
|||
|
yea i took your adivise and checked, the turbo is brand new and there is no shaft play, im not sure which direction its spinning, id have to look tomorrow i dont have the turbp right here on hand.
__________________
GEISI DRIVE FAST AND TAKE CHANCES |
|
#4
|
|||
|
|||
|
Re: not getting any oil return!!! help me out!
oil retun is tapped above oil line in pan? you are sure of it?
__________________
99 [email protected] psi si- I voted for the Terminator for Gov. 95 HB- B16a2- SC34@12psi WTB: USDM B16a2 or B16a3 complete short block. pm is the key. FS: B series InlinePro cast mani, PnH RC 550s, and Hondata S2b. pm me. |
|
#5
|
|||
|
|||
|
oil return is tapped above oil line in the pan? i tapped the oil pan at the highest possible point on the oppisite side of the drain plug, and the turbo oil retun is highed than the spot i tapped the pan because it is gravity feed. the line isnt my problem, oil is comming out of the turbo itself.
__________________
GEISI DRIVE FAST AND TAKE CHANCES |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|