Dead transmission WG 4,7 V8 1999->

[zmei]

Hi ppl,
I desperately need help, here`s the problem:
The jeep was O.K. -> one week not in use -> the battery was low -> the engine started hardly, all electrical equipment blinked to death, the CD/RC/tuner forgot its code AND the transmission was dead....

not a sign of movement neither in R or D, the oil level is equal with engine running and stopped - seems like the torque converter is not moving at all;

there were seven error codes - five for the engine and two for the tranny, after resetting, one for the tranny is persistent - the oil pressure detector is out;

does any of this sound familiar to any one, any advice - where is situated this oil pressure thing, how to short-circuit it, or this is not the real problem ?!?

HELL WITH THE ELECTRONICS

[Cam7]

What was the code number??

[Dr. Eagle]

We did have a problem with our 00 GC, I think it was the shaft position sensor... not sure. The sensor repair cost about 300 bucks.

[zmei]

thanks for these posts any attempt to help is appreciated.

the real problem was qiute different the stupid electronic had misguided me - the oil pressure detector was "O.K.", but there wasn`t any oil pressure - oil pump was dead, leading the whole transmission to the hell it was 73K km...
so: new oil pump, new torque converter, new clutching kit - approx. 2500$, another 350$ to the mechanic...
the question to the electronics is: why this wasn`t prevented....
anyway this was the first and the last Jeep I`ve ever owned

I`ll continue to buy only Mercedes, biult until 1995