dash still not working...

[xtanmanx]

ok..have checked fuses they are all good. pulled dash today, and dont see any obvious broken traces (but have not checked with a meter yet). i did notice some burn marks at the contact points of the diodes. anyone ever have these go bad on their dash and have the fuel and the temp guages quit working?

[Crvett69]

did you try taking the wire off the temp sensor on engine and ground it and see if gauge goes up?

[xtanmanx]

no, because i dont see both sensors going bad at the same time.

[Crvett69]

might as well try it, just takes a second