|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
87 2.8 identification
I was informed that the 2.8 in 87 S-10's are different than any other year! I have never heard this before and was wondering if anybody else has heard this ?
|
|
#2
|
||||
|
||||
|
Re: 87 2.8 identification
what is it that suposedly sets it apart? or is that part of your question?
|
|
#3
|
|||
|
|||
|
I was told that the crank sensor was different and there was some missing bolt holes . I have a motor from a 86 that I want to rebuild and would not like to find out that it won't work after I pour the $ into it.
|
|
#4
|
|||
|
|||
|
Re: 87 2.8 identification
you were told wrong. they made a change in 85, and the front wheel drive motors are a litle different.
Don't make the same mistake that I did, don't re-build the 2.8L... rebuild a comaro 3.4L v6 they are the same block and a much better motor for a s-10. you'll need to re-use your oil pan, oil pickup and the flex plate (or flywheel) which you will have to get re-balanced. plus you will need the comaro's entire serpentine belt system unless yours is the same (the water pump might spin the wrong way otherwise) otherwise it's a direct bolt in |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|