|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
well i went to my boys house to play some pool, and when i got there a guy tells me he wants to race, i told him he was
because it was raining, well he says his stang would whip my maro, well he was drunk so i let him talk and he said his 1987 5.0 stang was pushing out 325hp with just CAI, i asked him what he ran in the 1/4 and he said he was running high 15's i told him he was bullshitting but he wants to race for money now, so my question is how much hp is the 87 5.0 pushing?
__________________
89 Camaro with lt1/t56/headers,borla exhaust,ac delete, march pulleys, slp CAI,3.73 gears,msd ignition,port & polished heads, reprogrammed pc, free mods, hotchkis suspension,sub-frame conn & weight reduction. |
|
#2
|
||||
|
||||
|
Re: 1987 5.0 stang ?
lol no where near 325... my v6 runs mid 15's..., he was obviously drunk
|
|
#3
|
|||
|
|||
|
Re: 1987 5.0 stang ?
yeah this guy was pretty waisted but he said that he whips lt1 and only barely looses to ls1, i know he was bullshitting. but how much hp does the 87 5.0 push?
__________________
89 Camaro with lt1/t56/headers,borla exhaust,ac delete, march pulleys, slp CAI,3.73 gears,msd ignition,port & polished heads, reprogrammed pc, free mods, hotchkis suspension,sub-frame conn & weight reduction. |
|
#4
|
|||
|
|||
|
Re: 1987 5.0 stang ?
225 hp stock
__________________
87 5.0 5 spd T-Tops - mass air conversion 9AL, msd distributer, coil, fms 9mm wires, bbk ceramic coated long tubes, bbk h pipe, 3" flowmaster catback, 190 lph fuel pump, 24 psi injectors, 70mm cobra meter, bbk AFPR, bbk fender kit with k&n filter, 12* base timing, flex fan, 3 row aluminum radiator, 6 piece headlight kit w/ clear corners, silver ponys, stormin normin cowl hood, saleen wing, and recently a new heater core
|
|
#5
|
||||
|
||||
|
Re: Re: 1987 5.0 stang ?
Quote:
__________________
[size=1]-1950 Ford Custom, flathead V8
-2013 Ford Flex -1999 Ford F150 |
|
#6
|
|||
|
|||
|
correct me if im wrong but dont stock 87' 5.0 mustangs run high 14's to low 15's?
|
|
#7
|
||||
|
||||
|
Re: 1987 5.0 stang ?
Quote:
__________________
[size=1]-1950 Ford Custom, flathead V8
-2013 Ford Flex -1999 Ford F150 |
|
#8
|
|||
|
|||
|
Well, boys as much as i hate to say, the 1987 was a big jump in horsepower and torque, however it ranged depending on which engine, (as you all know there is the high output 5.0).The high output 302 used hydraulic roller cam and rocker arms, between the years of 87-92, and also used forged pistons. Now ,these engines were rated at 225hp and 300lbft of torque. The base 5.0 was 205hp and 275lbft of torque. these came in most of your lx models,( except for a few, like my 92'
)now, in 1993, they switched to hyper"pukes", which actually lowered the horsepower in the gt's to 215hp. the cobra had a fairly modified 245hp, 310lbft of torque.in answer to your question though, it depends. the stock tbi engines in the firebirds and camaro's were rated at only 170hp.trust me when i say this, they were slow...i traded mine for my mustang. however, that all switched when the lt1 came out.if you have the lt1 in your car, fuel injection system and all, you would smoke it. my 92 has a trickflow upper lower, mass air flow, 373's, a "hot" aod trans, w/ b&m, full exhaust, and i can't break the 15 to 14 second barrier. now that sucks. you firstly need to realize that 15's ain't fast. and as long as you can beat "tuner" cars with 5ft spoilers and big a-- fart cans, then that is all that matters in life.
|
|
#9
|
|||
|
|||
|
Re: 1987 5.0 stang ?
smokey, if your maro really has everything you say, it should be in the mid 13's. you should not be worrying about that
|
|
#10
|
|||
|
|||
|
Re: 1987 5.0 stang ?
oh yeah i also have a k&n filter on my stang, not that that really matters.and a"little" bit bigger fuel injectors
|
|
#11
|
|||
|
|||
|
Re: Re: 1987 5.0 stang ?
Quote:
__________________
89 Camaro with lt1/t56/headers,borla exhaust,ac delete, march pulleys, slp CAI,3.73 gears,msd ignition,port & polished heads, reprogrammed pc, free mods, hotchkis suspension,sub-frame conn & weight reduction. |
|
#12
|
||||
|
||||
|
Re: Re: Re: 1987 5.0 stang ?
Quote:
I bet my stock Ricer car would
__________________
R32 GTR w/351w .020 forged, 8.9:1, PTK T76, Turbosmart 40 BC & 45 WG, Tial 40 BV, AFR 205s 310/245, 228/228 550/550 114 Hydro, 1.7rr, Isky RLs, 4" HKS exhaust, ARC 30x16x4 IC, 8 point cage, C2 gauges, 2 step, C4 3200 stall w/ R Manual & Hurst Ratchet shifter, 17" Panasport G7s, CSU 750 & bonnet, Vic Jr intake, 3.63 gears, Corbeau Carrera seats, Custom wide body, Bomex side skirts and rear 1/4 caps, Tommy Kaira bumper. |
|
#13
|
|||
|
|||
|
Re: 1987 5.0 stang ?
First off dont call me son okay old man, i ran my 1/4@ 13.11 @ 103.2mph i aint trying to start shit so don't come at me all wrong.
__________________
89 Camaro with lt1/t56/headers,borla exhaust,ac delete, march pulleys, slp CAI,3.73 gears,msd ignition,port & polished heads, reprogrammed pc, free mods, hotchkis suspension,sub-frame conn & weight reduction. |
|
#14
|
||||
|
||||
|
Re: Re: 1987 5.0 stang ?
Quote:
Your running 13s and talkin shit, that is funny. Hell, at least you're honest, I'll give you that.
__________________
R32 GTR w/351w .020 forged, 8.9:1, PTK T76, Turbosmart 40 BC & 45 WG, Tial 40 BV, AFR 205s 310/245, 228/228 550/550 114 Hydro, 1.7rr, Isky RLs, 4" HKS exhaust, ARC 30x16x4 IC, 8 point cage, C2 gauges, 2 step, C4 3200 stall w/ R Manual & Hurst Ratchet shifter, 17" Panasport G7s, CSU 750 & bonnet, Vic Jr intake, 3.63 gears, Corbeau Carrera seats, Custom wide body, Bomex side skirts and rear 1/4 caps, Tommy Kaira bumper. |
|
#15
|
|||
|
|||
|
Re: 1987 5.0 stang ?
well first off i wasn't talking shit, i was just saying how this stang said he would whoop lt1 and barely loose to the ls1, and i proved him wrong, i'm running nothing but pure engine next time i go to the track i'm definetly going to break into the 12s, by the way what are you running?
__________________
89 Camaro with lt1/t56/headers,borla exhaust,ac delete, march pulleys, slp CAI,3.73 gears,msd ignition,port & polished heads, reprogrammed pc, free mods, hotchkis suspension,sub-frame conn & weight reduction. |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|