parts

[JimR]

is there any performance parts for a 96 contour. its a 4 cly. im not looking for junk or NOS.

Is the 4 cyl and port or throdlbody injected?
i have a body and what looks like ports.

[beyondloadedSE]

Originally Posted by JimR

is there any performance parts for a 96 contour. its a 4 cly. im not looking for junk or NOS.

performance parts for the zetec?! are you kidding me! you name it, they have it for that engine.

I tried to interpret this: "Is the 4 cyl and port or throdlbody injected?
i have a body and what looks like ports." Is this english, haha? I couldnt make a bit of sense from that.

[pre98zetec]

Originally Posted by JimR

is there any performance parts for a 96 contour. its a 4 cly. im not looking for junk or NOS.

Is the 4 cyl and port or throdlbody injected?
i have a body and what looks like ports.

the jackson racing supercharger from the Focus fits with minor modification, Cams from ZXtuner will fit, a new head from ZXtuner will fit. UD pulley, Cam gears, header (needs modified), intake from CTAmotorsports.com..

Register at www.contour.org and look under Zetec Performance.


and I'm with beyondloaded, did you say?

[JimR]

haha ok you are right that was bad.

ok it the zetec a mulit port injection system?

[JimR]

it = is

[JimR]

how about headers do you know of any headers?

[pre98zetec]

Originally Posted by JimR

how about headers do you know of any headers?

Header, not Headers, there's only one on this car..

Look here.

http://www.contour.org/ubbthreads/sh...=5&o=2&fpart=1

You need to modify a focus header because there are no bolt-on Header kits for a pre-98 zetec.

[beyondloadedSE]

Seriously, we should just sticky a thread at the top that just says, go to contour.org for all your questions. They've already been asked before, and answered. People need to see the light! CEG has ALL the answers, and I'm not exaggerating. The resources on this site sucks. The majority of the people here only register because they have a problem and seek an answer. But since mainly the members consist of "problem seekers" nobody can really help them out, since they to came here looking for answers to their problems. There are a few people that know what their talking about when it comes to the contour/mystique, myself being one of those people. But being a member of contour.org (and now a moderator) for about 5 years, having done a complete engine/drivetrain teardown on this platform, I've seen it all, and have seen every question you can possibly think of asked ad nauseum.

JimR, by the way, you can edit posts if you find a mistake. Just thought Id let ya know.