2.4 cold air intake install

[014drcavalier]

can anyone give me full instructions on how to install a short ram intake on a 2.4.. if so thank you

[noshun]

Originally Posted by 014drcavalier

can anyone give me full instructions on how to install a short ram intake on a 2.4.. if so thank you

Take intake and parts out of box an Familarize yourself with parts. you should have. A tube with a black grommet on the elbow to put the sensor out of the stock tube in. A filter. a Rubber 90 degree elbow. a 1" rubber pipe with an alu connector two jubilee clips. start by undoing the 4 screw securing the filter cover. then pull the black plastic clip that secure the front of the fuse box and pull it free. remove the battery for easier working. locate all screw securing the intake box and pull it out. Don't worry too much about the bong in the fender behind the bumper. Now undo the clip at the black plastic box attached to tb This also has to be removed. there ar two bolts in front of the valve cover on a brasket. you can remove the bracket too. The Jubilee clip holding the bow to the tb had to be got at through a hole in front of it. undo it and twist it off don't yank though as the breather pipe ic conected to it. Push the alu adapter into this and then the extension 1" hose. Push the IAT sensor into the new tube. This requires some work. try some lubricant like copper grease to help. Then attach the elbow to the TB and tighten. then attach the breather hose to the tube. then push the tube into the elbow. undo the bolt next to the p/s resevior but only enough to slide the rubes braket under the nut. This is a little difficult though. Tighten that and everything. Reconnect the sensors wire and then install the filter! E' Viola!

[big dude1]

Jeez where were you when i put my intake on lol... took me like 30 minutes to get it on there since it didnt have any instructions...

oh and to the dude who posted the thread, what company did you get the intake through?

[noshun]

Originally Posted by big dude1

Jeez where were you when i put my intake on lol... took me like 30 minutes to get it on there since it didnt have any instructions...

ENGLAND!

[inarifennec]

Originally Posted by noshun

ENGLAND!

Off Topic: Nice Sig Noshun. Shiny @_@

[noshun]

Originally Posted by inarifennec

Off Topic: Nice Sig Noshun. Shiny @_@

40 layer animation for a few seconds!!!

[inarifennec]

Originally Posted by noshun

40 layer animation for a few seconds!!!

boo ya. pays off doesn't it?

[noshun]

Originally Posted by inarifennec

boo ya. pays off doesn't it?

I guess! It only took me about 20 mins due to using my old sig! I was wondering how many people thought it was somthing upn with their pc at first!

[014drcavalier]

i got it from a guy off ebay...

[noshun]

Originally Posted by 014drcavalier

i got it from a guy off ebay...

That's always risky!!!

[Classicrocjunkie]

Yaye... e-bay!.... = Crap 89% of the time.

[noshun]

Originally Posted by Classicrocjunkie

Yaye... e-bay!.... = Crap 89% of the time.

89.85942455155488%

[inarifennec]

Originally Posted by noshun

89.85942455155488%

*points in the direction of Noshun's Post on the biggest POS for your car. that thingy that makes the sound of a BOV.*

FSSSHHHH! holy crap how many pounds of boost was that? 12? 13?

[noshun]

Originally Posted by inarifennec

*points in the direction of Noshun's Post on the biggest POS for your car. that thingy that makes the sound of a BOV.*

FSSSHHHH! holy crap how many pounds of boost was that? 12? 13?

?huh?!!! thw whistly exhaust pipe thing?!?!?! what does that have to do with cold air intakes. I'm completely lost!!

[inarifennec]

Originally Posted by noshun

?huh?!!! thw whistly exhaust pipe thing?!?!?! what does that have to do with cold air intakes. I'm completely lost!!

was just commenting on the sometimes uselessness of the items on ebay.