EVERYTHING goes wrong in less than 10 minutes!

[ImolaEK]

Well today i wake up and i realize that today is when i am supposed to receive my report card in the mail. So i go to work on my Ferio and my Skyline. I fix the few errors on my R32 and go to check the mail. Turns out i failed the Mid Terms on my English II Honor's class. Immediately I become reallly madd! So i go to clean everything up since I was soo madd that i was going really didn't want to mess around with models. So then i see the R32 and grab it, then squeeze it. Then i realize what i was doing so i let go of it. I then realize that i need to put away my Airbrush, so i start to clean it with lacquer thinner since i was using lacquer. So i am done cleaning the airbrush, i go to disconnect the hose from it and..........Slip, pah, ouch! The airbrush falls in the back and the needle is pushed forward breaking the nozzle and damaging the tip of the needle. Thank god the Ferio wasn't near me or else...ouch! Luckily the R32 is still alive. Now i don't even know if I am going to be able to go NNL east on the 18th

Here is a picture of the damage on the Nozzle and Needle of my Paasche VL Airbrush Size 3



R32 is still alive

[carlisimo]

Ugh, sorry about your bad day. Especially after you caught yourself before you hurt the R32... it really has to a bad day for something to go wrong after that.

You can jury rig it with pliers maybe, for wide-spray applications. Might hold you over while you get a new tip.

Good luck with that, and with that class.

[ImolaEK]

Originally Posted by carlisimo

Ugh, sorry about your bad day. Especially after you caught yourself before you hurt the R32... it really has to a bad day for something to go wrong after that.

You can jury rig it with pliers maybe, for wide-spray applications. Might hold you over while you get a new tip.

Good luck with that, and with that class.

Thanks man, I might call up the art store to see the prices on those parts. Right now I am thinking of using my Iwata to clear coat the Ferio since now I am a bit more calm. But i promised myself not to use anything but Water colors on my Iwata. And my badger is for nails and holds little to none paint! I knew i should've bought that Iwata Revolution CR for backup

[SupaMan89T]

damn man i had that sorta day also but i didnt break i air brush just messed up 1 of my best lookin models in a long time with a crappy decal job i dunno what im doin wrong no matter what i do they come out crappy o well man hope ya get new stuff soon!

[Vric]

Bad day, we always have some.

Luckily, you will find the only real adventage of the Paasche VL, you got 3 needle/nozzle so you can still use it

[ImolaEK]

Originally Posted by Vric

Bad day, we always have some.

Luckily, you will find the only real adventage of the Paasche VL, you got 3 needle/nozzle so you can still use it

Meh, my dumbass bought the brush only. The one that comes in the little red box. I got it in a deal on eBay, 6 VL airbrush's for 200 bucks. I sold 5 of them and kept one (this one). So i literally bought this airbrush for 33 bucks.

[primera man]

Some days dont ya wish ya never got out of bed eh?

[ImolaEK]

Originally Posted by primera man

Some days dont ya wish ya never got out of bed eh?

Definitely

[blubaja]

Hey,

Oh man:-/ Don't ever touch, or even think about models if you're havin a bad day. I tore my room apart once b/c I was mad. Models flew all over. Luckily, they were still in their boxes. Sorry man. Hope everythign gets better. Do you think they will let you redo your midterm?

Frank X.

[ImolaEK]

Originally Posted by blubaja

Hey,

Oh man:-/ Don't ever touch, or even think about models if you're havin a bad day. I tore my room apart once b/c I was mad. Models flew all over. Luckily, they were still in their boxes. Sorry man. Hope everythign gets better. Do you think they will let you redo your midterm?

Frank X.

Doubt it, she's too much of a B****...

[SupaMan89T]

damn man sorry about that shitty day i found a way to fix my decal problem but grades arent as easy as coloring it flaked parts

[Vric]

Would it be great if we could have an "unDo" button in life like in computers

[SupaMan89T]

Originally Posted by Vric

Would it be great if we could have an "unDo" button in life like in computers

yep it sure would i would undo selling my supra

[DukeMan]

Oh man I´m feeling your pain! I did a similiar thing to my previous (quite obviously) airbrush. I was spraying a bike or something when I started to get annoyed over the nozzle cap (you know the piece that´s suppose to PROTECT the needle and nozzle) getting clogged. Then I remove the cap and everything works great, until the second when I slip with my hand (don´t bother asking me how) and: NO! SHIT! F-CK! HOLY CRAP WTF! YOU IDIOT!!! YOU DUMB F-CK!!! The airbrush fell over and the needle got stuck hard in the table and bent, and screwed. And here is the funny part, as my father managed to fix it up a little bit I clean it and as I screw on the nozzle with the little wrench provided in the kit the nozzle just break into two pieces... So you are not alone, you are not unique in this area is that can cheer you up a bit.

[DukeMan]

Oh and BTW I would just love to have that "undo"-button, almost as much as I would like to have a "copy" and "paste"-button...