|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
02-10-2005, 08:13 PM
|
|||
|
|||
|
jus a idea....
how much would it cost if i wanted to swap a buick 3.8 turbo engine like the 1s in teh grand nationals into a 3rd gen. camaro....would it do much good for teh swap or would it jus b a waste of money...i dont kno much about teh engine but i kno grand nationals were fast as S*** lol...
|
|
#2
02-10-2005, 09:32 PM
|
||||
|
||||
|
Re: jus a idea....
The 1989 turbo trans-am used a slightly better version of the GN turbo 3.8.. Same engine, but TTA had different heads (to allow the engine to fit inbetween the strut towers) different pistons to keep the same combustion chamber volume, and a cross drilled crank, and stainless headers
If you could get a buick GN engine, with the TTA heads and headers, and a gnx intercooler you might be able to make it work.. Use TTA motor mounts and such.. they also used a 200-r4 tranny
__________________
1991 Camaro Z28
|
|
#3
02-10-2005, 09:35 PM
|
||||
|
||||
|
Re: jus a idea....
gettin your hands on TTA parts could be real tough.. there were only like 1500 of them made and im not sure if you can get these parts from the dealership.. youd probably pay $$$$$$$$ for them..
They were pretty quick cars though.. GM rated them at 250 (i think??) because of the unwritten corvette rule (no passenger vehicle of the same year shall have more hp than the corvette) But bone stock, they dyno'd at closer to 300hp
__________________
1991 Camaro Z28
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
