|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
02-09-2005, 07:57 PM
|
|||
|
|||
High beams wont work
My low beams work but my high beams will not work. The indicator light wont even turn on. Anyone have any ideas?
|
|
#2
02-09-2005, 10:41 PM
|
|||
|
|||
|
Re: High beams wont work
first try is to pull the bulbs, check the filaments. second thinking is the high-set on your lever won't engage, ouch. Look at the bulbs first.
|
|
#3
02-09-2005, 10:46 PM
|
|||
|
|||
|
Re: High beams wont work
Oh, slight possible, check your headlight relay and/or fuse. If it in relay, easy two wire-fix, but it means a separate switch, cuz ya have to bypass the relay into two parts.
|
|
#4
02-10-2005, 05:33 PM
|
||||
|
||||
|
Re: High beams wont work
if you have a 95-99 cav then if your daytime running lights are your high-beam with less voltage so they are'nt as bright. If these work then it would be the relay for the hi-beam.
__________________
Red Z24 = Dead, 03 2 door = 15.5 with no traction. low 15's here i come 'Never forget Grasshopper, Not speed, smile!'
|
|
#5
02-11-2005, 03:07 PM
|
|||
|
|||
|
Thanks for the help i will check all of these.
|
|
#6
03-12-2005, 09:06 PM
|
|||
|
|||
|
I am having the same problem with my 98 cavalier. I have day lights but no head lamps, however my brights will come one, but they won't stay on by themselves I have to hold the switch back with my hand to keep them on. I have checked my fuses and the bulbs are not burnt out, I think I may need a whole new switch. If so how difiicult is that to replace. Also my care radio and clock reset every time I turn the ignition off.
|
|
#7
03-14-2005, 01:12 PM
|
|||
|
|||
|
Re: High beams wont work
I had this problem twice with my 2003. First time it was a broken wire somewhere near the battery. It was fixed under warranty. This last time it supposedly was a corroded connector.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
