|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
02-09-2005, 07:20 PM
|
|||
|
|||
turbo question?
Afamily I know owns a tranny shop and some kid came in with a 92 ford probe 4 cyl. turbo. It has a blown head gasket and the kid tried to fix it
and couldn't . Anyway I bought this car  after the kid's daddy bought him a new car and the tranny shop just wanted it out of their lot.My question is what maintainence do I need to do to the turbo when I do the head gasket?  I realize that this is a geo forum,but I am assuming that a turbo is a turbo,  and a metro turbo probably gets pushed harder because we have to work harder for our power. any help or suggestions will be appreciated
__________________
Avfan 94 geo metro 200k 1l 89 ford probe lx 150k 2.2l 76 Ford F150 w/390 edelbrock performer series 4bbl 4x4 
|
|
#2
02-10-2005, 11:23 AM
|
|||
|
|||
|
well, if you're gonna do the headgasket, have the head re-surfaced, if not milled. If it had a blown headgasket, the head could be warped. It could also be cracked. So I would have it pressure tested too. If it's warped, have it milled down. But if you have it milled, be sure to put a thicker headgasket on it, to compensate for taking some metal off the bottom of the head. As for the turbo, see if you can get a rebuild kit for it. It could probably use new seals and bearings. If you really wanna get it goin, have the turbine blades sharpened. It'll cut down on the lag.
|
|
#3
02-10-2005, 06:29 PM
|
|||
|
|||
|
Re: turbo question?
Thanks ,Ifigured you would answer me! That car is going to be my friday afternoon getaway car.Load up the wife and leave for the weekend.Or leave the wife and get loaded for the weekend? One or the other
__________________
Avfan 94 geo metro 200k 1l 89 ford probe lx 150k 2.2l 76 Ford F150 w/390 edelbrock performer series 4bbl 4x4
|
|
#4
02-11-2005, 12:24 AM
|
|||
|
|||
|
lol. That'll be a fun car too. They have bad headgasket probs tho. If you want a nice reliable one, that you can boost the shit out of, i'd recemmond a copper headgasket, and a stud kit. The studs will hold everything in place better, and will handle more clamping pressure. And the copper headgasket is REALLY hard to blow.
|
|
#5
02-11-2005, 07:33 AM
|
|||
|
|||
|
Re: turbo question?
Where can I pick a copper one up at? I am going to look at the car for the first time tonight and may get it home to start working on this weekend.
__________________
Avfan 94 geo metro 200k 1l 89 ford probe lx 150k 2.2l 76 Ford F150 w/390 edelbrock performer series 4bbl 4x4
|
|
#7
02-11-2005, 12:46 PM
|
||||
|
||||
|
Re: turbo question?
Arkansas? you might want to try http://www.summitracing.com/ they have all kinds of stuff. I think they even ship to Arkansas!
|
|
#8
02-16-2005, 06:54 PM
|
|||
|
|||
|
Re: turbo question?
Sometimes someone even ships sunlight here !
I live about 15 miles from the corporate hq of wally world(or wal-mart to you uninitiated) so they have all kinds of suppliers here! Thanks for the info
__________________
Avfan 94 geo metro 200k 1l 89 ford probe lx 150k 2.2l 76 Ford F150 w/390 edelbrock performer series 4bbl 4x4
|
|
#9
02-17-2005, 11:49 AM
|
|||
|
|||
|
http://www.importperformanceparts.net/
That's where I bought everything for my 1.3DOHC rebuild. They ship really fast too.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
