Project GA

[Forkliftguy]

Well between my busy work schedule now that I'm in full fledged busy season at work and everything else I have began "Project GA". Phase is the front skirt on the GA. I am manufacturing it in my "Lab" aka back room of my basement. Lol. It will house 2 aircraft lights rated at a crazy 100W a piece for those long stretches of country roads I have to drive to get to work. It will the center port will have a shroud to between it and the rad for optimal cooling. The two outer ports will be plumbed for cold air intake.

Marc


Well, it appears I can't seem to upload my pics to this thread. If anyone can help me out as to how to do this I would appreciate it....

[Forkliftguy]

Ok, I kinda figured it out, not the way I want to do it, but what can you do? Keep in mind that it's far from complete...sort of.

http://files.automotiveforums.com/ga...cat=500&page=1

[Ridenour]

Dude, Marc - that's gonna be badass! That's a great design idea. Make you sure post pics as you make progress.

[FormulaLT1]

I look forward to seeing the finished project as well and here are some instructions posting a pic on this site or adding one to your sig. If you would like any help editing the size or the pic let me know.

OK here are some directions for those of you that still are having a hard time with posting a pic. here are directions on posting a pic. If you have imageshack host it just start from step 6.

These are instructions I wrote a while back but when you do the first part just make sure it has you signed in and if your pics are too big for this site let me know and I can edit them to make them smaller for you or you can just go to www.imageshack.us and have them host it and they will give you a formated link to post the pic on forums like this one.
OK here is how you post a pic on this site, first you

1. click on the gallery button of one of your post's

2. Click upload button in the upper right hand side.

3. choose which catergory you want the picture posted in , also make sure that your picture the same size or less than the 80 K space they allow you.
(if that is a problem I can help you with editing the picture)

4. hit browse and find the picture in you computer you wanted posted then click it.

5. wait for it to upload.

6. then go back into your gallery section in one of your posts again double click your picture and then you will see share this photograph on the message board you need to copy that link and either put it in your sig to have it in your post's like mine or you can post it right in a message.
John


Edit- To put the image in your sig you click usercp in the top right hand corn of the screen and then click signiture and pasted the link in the space provided and then click save and your set.

[Forkliftguy]

ok, thanks John for the photo tips, I'll give it a shot. I'll post more pics as they become available. Glad you guys like it so far. If all goes well I might start building some kits for the our club here.
Cool seems to work

[Forkliftguy]

After a lot of work here and there in the sanding department I'm finally ready to pull a mold off of the the plug. Pictures to follow...