|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
Hey guy's , my wife has a 97 intrepid and the heater/a.c blower only works in the high position. I did a search and pretty much narrowed it down to the blower resistor. Has anybody replaced it themselves? If so where is it located ? Also the engine sometimes stumbles after starting, both when hot or cold. We have kept up with the maintenance plugs,filters,etc. but can't seem to get rid of the stumbling/hesitation. Seems like many other people have numerous problems with these cars especially the 2.7L ones , I'm starting to think this car is a piece of crap.(sorry intrepid lovers)
|
|
#2
|
||||
|
||||
|
On my 2002 Dodge Minivan it's behind the glovebox. I'd just phone the parts department at your local dealer and ask how much and where it would be located.
__________________
|
|
#3
|
|||
|
|||
|
Hey guys , thanks for your help. I purchased a blower resistor from the dodge dealer ($17) and everythings fine now . Wife is happy so I'm happy. Thanks again
|
|
#4
|
||||
|
||||
|
Re: 97 intrepid - Blower resistor replacement ( How/Where)?
Stumbling? Always go for the EGR valve first.........most of the time, this is it.
__________________
'93 Ponty Transport 3.8; 2011 SUzuki SX4 AWD (wife's) ; 2015 Sorento 2.4 AWD 1928 Graham Paige Model 629 I don't believe in miracles. |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|