|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-28-2005, 10:43 AM
|
|||
|
|||
|
F-body 95 Camaro Bose-Wiring System
I decided to post this in a new thread for those of you that would not of seen my previous thread with the problem putting in a aftermarket receiver into a stock bose system. The below site will show you the bose wiring system which differs from conventional wiring systems. If you went today and bought a GMC wiring harness for your receiver. Chances are it would not work with the Bose system. I hope this helps anyone with the nightmare of plug and pray wiring harness.
http://shbox.com/1/bose_wiring.jpg 
|
|
#2
01-28-2005, 11:55 AM
|
||||
|
||||
|
Re: F-body 95 Camaro Bose-Wiring System
Places like crutchfield sell adapter to plug a non bose head unit into a bose system or on the other hand if your replacing the speakers you should just replace the head unit anyway. Also I did this on one of the bose systems in my Vette and it worked. I removed the speaker enclosure and bypassed the amp and solder the wiring directly to the speaker and this worked but there are tons of options at this point of dealing with bose. Hell even some companys like Pioneer and Jenson make direct replacement.
__________________
RIP Hypsi - I just want to express I will never be the same after having lost such a good friend. You meant alot to me and I feel I am a better person for having known you. Til the day we meet again my friend you will always be in my heart. Mods: Weight reduction (I don't wear underwear) Last edited by FormulaLT1; 01-28-2005 at 02:21 PM.
|
|
#3
01-28-2005, 01:13 PM
|
||||
|
||||
|
Re: F-body 95 Camaro Bose-Wiring System
i actually have two of the adapters not doing anything if anyone ever needs em
__________________
 *Better power-to-weight ratio than a C6 corvette*
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
