|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
crazy idle problem
ok so....my friend just bought a throttle body spacer for a 00, sedan dx and a quick shot of nitrous ( like a little 30 shot that is hand held) so i told him i would help him put it in. So we put everything in and now whenever he starts his car, his car just keeps reving and we have to turn it off or else it will keep reving. we checked all the vacuum lines and all the sensors and everything is pluged in as far as we can see. could we have adjusted the idle very high on accident when we tookt he throttle body off??? or smt of that nature???? so any feeedback would be greatly apreciated thanks
|
|
#2
|
||||
|
||||
|
Re: crazy idle problem
little screw on the top of the tb, its covered by a little black tab, turn it counterclockwise to turn the idle down. might just be the spacer, i never really saw a use for those
__________________
D16Y7/D16Y8 mini-me swap turbo coming this summer |
|
#3
|
|||
|
|||
|
Re: crazy idle problem
leak in the gasket?
__________________
99 [email protected] psi si- I voted for the Terminator for Gov. 95 HB- B16a2- SC34@12psi WTB: USDM B16a2 or B16a3 complete short block. pm is the key. FS: B series InlinePro cast mani, PnH RC 550s, and Hondata S2b. pm me. |
|
#4
|
|||
|
|||
|
ya we were jsut trying it out to see if it will do ne thing we'll let u know how it turns out if we can ever fix our problem but for now we just put it back to stock and now its throwing codes so we haev to figure out what they are now thanks for the feedback
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|