Part 7: I can't hear you! (Voting TIme!)

[Rice-Rocketeer]

Ok we've got four complete suggestions of setups so I'll just those for the poll. The choices are:

[Size= 1]

1-> Gusto222 Setup
All Prices taken from www.tms-electronics.com

JVC KD-SH99 (mp3 player) - $330
JL Audio XR653cs (3 way Comp. speakers) - $385
*No rear Stage*
(2) Orion XTR375 (93 watts x 2 or 375 watts x1) - $680
Orion XTR Pro 10 DVC (cast 10", 1000 watts) - $168.00
10" box - $70
Outlaws UltraPro4CB+ (4g install kit) - $125
Cadence CAP-1R (1 Farad stiffening capacitor) - $110.00
Do the labor yourself - $FREE$

TOTAL - $1868

2 ->igo4bmx Setup
ALpine IVA 800 - 1000
fronts - crystal comps -159
no rears
two alpine 12 incher dvc subs -240 total
dual 12 1 cubic foot box - 60 bucks
lanzar 1200D mono block amp -225
1 farad lightning digital cap - 80
alpine mrv-f340 - 250
2 sets of nice rca-s 50
speaker wire (12 g, 16 g) -30
hook up wires - 30
install materials - 50

Total - $2124

3 ->94civic Setup
2 12" brahma series subs $740 (doesn't need a big box and runs at 1600watts rms, 4800 peak-massive subs) only .65-1.25 cubic feet box needed. Check them out: http://www.acoustic-visions.com/brahma.htm
sealed box- $100
6.5" infinty components in the front $180
6.5" infinity two ways in the rear $70
Audiobahn A2200HC amplifier (1600 watts) $400
Lightning audio 1 farad cap $90
wiring $100
Panasonic CQ-DVR909U AM/FM/CD/DVD A/V Player $500
6" dash tv monitor $150

Total - $2330

4 ->kicker1_solo Setup
Eclipse 5303R headunit
2 12" JL AUDIO W6s
MTX 2150x amp per sub
Kicker mids and tweets
MTX 2450x amp for components

[/size]

Kicker1_solo, you need to give me a total for all that.

But there are your choices ppl, have fun and vote.

[igo4bmx]

i think that having the in dash player instead of seperate HU and screen is better since the menu interface is much more interesting.

[auke1]

Be a pal and let me know if you see "header" or "exhaust" mentioned in this list that I copied from the other thread:


1997 EX Coupe $4350
Title transfer and other expenses $150
CR-VTEC complete swap $4000
DRAG Turbo $3500
koni yellows $550
gc coilovers $290
rear si sway bar $40
rear disk brake conversion $250
kosei k1 $525
kuhmo 712's $308
powerslot cross drilled and slotted rotors $160
pads $90
Tsunami Front lip- $355.95
Buddy Club Rear bumper ($230) and side skirts (460)
paint- extra $300?
Si gauge cluster- $150
indiglo insert-$80
2 black corbeaus for the front ($400 each) and black GSR for back ($400)
2 Sabelt 4 point harnesses- total of $200
Momo Competition steering wheel- $170
DC sports short shift- $100
Home made clear/smoked corner/gunmetal housing headlight $10
red-clear tails-$150
aluminum sparco pedals- $35

I see turbo, and swap, but no exhaust nor headers , which are essential to this car. I may be a little shit for bothering you about this, but these parts are important things to look at. Correct me, and i'll shut my mouth on the topic

[94civic]

you can't have headers on a turbo car only a turbo manifold.

[auke1]

whatevs, what about the exhaust

[sparq]

WHY THE HELL WASNT MY SUGGESTION LISTED...

PSshhhht, Rene you are fired :finger4:

[Rice-Rocketeer]

Originally posted by auke1
Be a pal and let me know if you see "header" or "exhaust" mentioned in this list that I copied from the other thread

Other than the fact that yeah it's obvious the fact that you can't have headers on a turbo'd car, I already said we're over the engine stuff. Go look at the components the turbo package brings and quit yer bitchin.

Originally posted by sparq
WHY THE HELL WASNT MY SUGGESTION LISTED...

PSshhhht, Rene you are fired :finger4:

Because not everyone will be able to get the sparq hookup. It's not something you advertise and everyone can buy.

[sparq]

Originally posted by Rice-Rocketeer
Because not everyone will be able to get the sparq hookup. It's not something you advertise and everyone can buy.

UHhhhh, sure they can -- if they got the money, geesh what like im gonna say "No sorry you cant give me money to buy stuff " ?

:finger: