|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-14-2005, 11:45 PM
|
|||
|
|||
|
350 valve train prolems
i have a mildly built 350. the problem is that it backfires through the exhaust. i took off the valve covers and all the valves seem to be working fine, except 1. it barely moves at all. could this be because of a bad cam, bent pushrod or something else? im tryin to get information before i start ripping into it to find the problem. thanks and any suggestions would help.
|
|
#2
01-15-2005, 12:25 AM
|
||||
|
||||
|
yes the backfire is caused by the valve not opening up all the way ..... i would pull the rocker arm off on the valve and then pull the push rod out and see if it is bent ...... if not you prolly had a lobe go down on the cam.....
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
