|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Pathfinder | Terrano | QX4 | Xterra | Patrol | Safari | X-Trail Nissans greatest 4WDs and SUVs |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
01-06-2005, 04:05 PM
|
|||
|
|||
2000 Pathfinder key programming
I had purchased my pathfinder used and only received one key with it. I found out later that a new key at the dealer cost about $100!! I found blank transponder keys on ebay for $15.00. Could someone tell me how to program the new key? Thank you.
|
|
#2
01-07-2005, 10:57 AM
|
|||
|
|||
|
The key for your 2000 pathfinder uses a system called NATS{nissan anti theft system}.The transponder must be programmed into the IMMU and ECM.This can only be done at the dealer.Consult 2 is the only way to programm new keys.Otherwise anyone can buy a key, copy your cut and programm it themselves.
|
|
#3
01-07-2005, 11:30 AM
|
||||
|
||||
|
You can actually try and find a locksmith that cuts car keys cuz some of them can program these kind of keys. I had to get a extra set of keys for my 02 pathy, and the locksmith only charge $80 to cut 2 keys and program 3 keys compared to couple hundred it would have cost at the dealer.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
