-
Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Pontiac > Grand AM
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 12-15-2004, 03:50 AM
Justinh722 Justinh722 is offline
AF Newbie
 
Join Date: Dec 2004
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
Car wont start after shut off a while.

I have a 1992 Pontiac grand am with a 3.3L and 190,000 miles on it. After it has been driven a while and then shut off, it wont start after about 10 mintues of cooling down. It takes atleast 2 hours for it to restart. I have checked the diagnostic codes and i get 26(Quad driver fault) 27&28(gear switch circuits). However, it will start with starter fluid, but only until the fluid runs out...like 10 seconds after it starts. It doesnt seem to get gas, although, the filter had been replaced and fuel pump checked. I had been told to get a noid light and check the injectors. Also been told it could be a MAF sensor or crankshaft sensor.

Tonight, i did try and start it after it had been driven, with no luck i decided to unplug the MAF sensor and try again. Once again, i didnt have any luck. So i went to plug the MAF sensor back in and tried once more......fired right up. I really desperatly need some help, so far i've spent about $150 on 2 mechanics that didnt find a thing. For the record, i do have the TCC selenoid unplugged, could that cause error codes 27 and 28?
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Pontiac > Grand AM


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:20 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts