|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
Blower won't work on "high"
94 S-10 Blazer, 4.3, W
Recently, I've lost my "High" setting on the heater/AC blower. It works on low and medium, but nothing else. I've taken the 4-position switch apart, cleaned the contacts, and checked continuity - all good. I've looked at the resistor block and all seems well. I haven't put a meter on it, but all 3 coils are intact and look good. Service mgr at the dealer says it's the switch ( $8 ) but I've cleaned & checked mine. I don't mind spending 8 bucks to get heat, but should I have to? Any other ideas? thanks, Ducati |
|
#2
|
|||
|
|||
|
Re: Blower won't work on "high"
well....it seems you checked alot.....
i had mine only work on med and high....... replaced the switch....and works fine now.... well good luck |
|
#3
|
||||
|
||||
|
Re: Blower won't work on
Quote:
|
|
#4
|
|||
|
|||
|
Re: Blower won't work on
Quote:
|
|
#5
|
|||
|
|||
|
And the winner is.....
The relay! Thanks, Mikado - I had forgotten all about that relay. Ducati |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|