-
Go Back   Automotive Forums Car Chat > Ford > Contour
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 11-28-2004, 03:58 PM
spiel1 spiel1 is offline
AF Newbie
 
Join Date: Nov 2004
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Post looses power when at half tank gas or less

I have great power untill I reach half of a tank of gas or less. Then I start no power. As the tank gets more empty the power decreases. We have changed plugs, wires, filters with no luck.
Any Ideas
Reply With Quote
  #2  
Old 12-12-2004, 10:54 PM
esunde esunde is offline
AF Newbie
 
Join Date: Dec 2004
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Sounds like a bad fuel pump, for sure. Have a fuel pressure test done with tank 1/4 full. For fun try turning on headlights, fan & other accessories and test pressure THEN! Good luck.
Reply With Quote
  #3  
Old 12-13-2004, 04:57 PM
Jason43's Avatar
Jason43 Jason43 is offline
AF Regular
 
Join Date: Nov 2004
Posts: 160
Thanks: 0
Thanked 0 Times in 0 Posts
Re: looses power when at half tank gas or less

I'm guessing you have a 99-00 with the returnless fuel system(be more specific). The fuel pumps in these cars have an almost 100% failure rate. There is a round mesh filter on the bottom of the pump housing that gets clogged, which causes the pump to burn up over time. Having hesitation with a low tank is a good sign that it is the pump. Spmotorsports.com sells the replacement pump(minus the housing) for under $100, or you can go with the higher flowing SVT Focus pump for the same price. The FSVT pump will drop in with very little modification. When I replaced my pump, I didn't use the Focus unit, so I'm not quite sure of the specifics. Theres plenty of info about it on contour.org if you want to check it out. Either way, make sure you leave the disc filter off.
__________________
Just go to contour.org

1999 Ford Contour SVT
Reply With Quote
  #4  
Old 12-13-2004, 06:32 PM
lost944 lost944 is offline
AF Newbie
 
Join Date: May 2004
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
I need help

I was wanting to know if anyone could help me out here. I have a 97 contour gl and the front driver side caliper is grinding against the rotor. and the outside of the caliper is grinding on the inside of the stock rim. the hub itself feels loose. can some body help me out. I think it may be the bearing. any help would be great.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Ford > Contour


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:54 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts