|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-27-2004, 03:00 PM
|
|||
|
|||
|
1995 3.8 Windstar starter
I am trying to figure out how to remove the starter on my Windstar.
It looks like there are two screws/bolts kind of hidden on the underside of the starter and one bolt on the side with a battery cable connected to it. What do I need to unscrew/unbolt in order to remove the starter? Any help would be appreciated. Chris 
|
|
#2
11-27-2004, 05:32 PM
|
||||
|
||||
|
Re: 1995 3.8 Windstar starter
Knowing the year/model might be helpful. There are two wires attached toe the starter and I believe two mounting bolts. It's easier to access it from underneath, be sure to use jackstands.
__________________
2003 Ford Expedition 4.6L (Dngrswife's) 2006 Kia Sedona 2008 Toyota Prius (totaled) 1997 Windstar 3.8 liter (retired) Replaced Head Gaskets 1988 S-10 2.8 liter (retired) Full Rebuild
|
|
#3
11-28-2004, 10:32 PM
|
|||
|
|||
|
Re: 1995 3.8 Windstar starter
It is the easiest starter job I've ever done.
1. Remove the nut that hold on the big wire, 2. Remove the two bolts that hold the starter onto the trans. (The heads stick out on the Transmission side. Don't let it fall on you.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
