FS: SiR gauge cluster, individual throttle bodies, MUCH more..

[91civicDXdude]

Im going to be putting a bunch of stuff up for sale to help buy some more presents for my little boy. More in the next couple days when i borrow somebody's digital camera.

anyways,

I have up for sale now...

- an EF8 CRX SiR JDM gauge cluster, i'll include an electric VSS. $110 shipped OBO

- USDM 90-91 Integra manual gauge cluster $40 shipped OBO

- **TRANSACTION PENDING**** CBR600F4i ITB's. includes: throttle bodies, factory plastic velocity stacks, fuel rail, injectors, FPR, idle control, home made vacuum manifold with all fittings. $125 shipped OBO

- 90 PR4 ECU $40 shipped OBO

- TRANSATION IN PROGRES>>>Diamond Racing 13x7 wheels (in other thread) price reduced to $80 shipped<<TRANSACTION IN PROGRESS

- B16A SiRI stock cam gears - $10 shipped

- 90 D16A6 complete intake manifold. make offer

- 90 D16A6 complete head. make offer

- non ZIF-style 28 pin IC sockets (for chipping honda ECUS)
I have about 200 of these, how about 3-for-a-dollar

- **PENDING TRANSACTION***90 integra 15/16 master cylinder & booster (nice upgrade for EF civics, direct bolt on) $45 shipped OBO

- complete B18A1 bottom end minus 1 piston - part out or buy whole. make offers

- 91 CRX Si rear "angled glass things that have the emblems on them". one says "honda" other says "Si" - $20 shipped OBO

- stock d16z6 exhaust manifold - make offer

- stock B18A1 exhaust manifold - make offer

- stock flywheels from D16Z6, B18A1 - make offer

- 90 CRX Si rear ebrake cables (for CRX rear disc conversion) make offer
- 90 Integra rear ebrake cables (for hatch rear disc conversion) make offer

- 90 B18A1 head for parts only, casting is messed up. part out or buy whole. has all the rockers etc. make offer

- Mitsubishi 4g63 non turbo head and intake manifold almost complete, parting out or buy whole - make offer

- various d series throttle bodies - $15 shipped/piece

- TRANSACTION IN PROGRESS>>>B18A1 58mm throttle body (upgrade for d series, 54mm) $20 shipped<<< TRANSACTION IN PROGRESS

- d15b2 bottom end (smokes) buy whole or buy parts - make offer

- D16Y7 bottom end, unknown if good or bad, buy whole or buy parts - make offer

- PCMCIA Linksys network adapter - $15 shipped OBO

- stock d16y7 cam gear - $5 shipped

I think thats all. heres a couple of pictures of items that i already pictures for. If you want pictures, pm or email me ([email protected]) and i'll take pics with my webcam or post pics of all if i can find a digi cam.








I take paypal and need to get rid of this shit ASAP. please, make offers, no ridiculous ass shit though. (offering $10 for something worth $100)

Offer Away!

[Masta]

i PM'd you. you dont have the b16 head?

[1PhatCX]

you wouldnt happen to have the proportioning valve off the teg would ya? the one on the car i stripped was abs so it was a million times bigger haha. lemme know bud

[91civicDXdude]

no b16 head, no brake portioning valve. sorry.

[TheSilentChamber]

hey will the ITB's fit a b17?

[91civicDXdude]

Originally Posted by TheSilentChamber

hey will the ITB's fit a b17?

technically, they will fit anything since you have to fab them up to fit. I personally wouldn't use them on a b series, IMO they're too small, but they would be perfect for a d series. (you can tell im not just trying to sell shit that wouldn't work with your setup what a nice guy )

[TheSilentChamber]

Ok thanks. Just curious, how much did you pay for them new? I'm wanting to go that route when I do my b17 swap and most of the setups I'v seen have been about 8 times what your asking for yours.

[91civicDXdude]

well this isnt the complete setup. To be complete, it needs to have the manifold fabricated, which isnt that hard at all. You just have to chop the runners off a stock manifold and weld on some short aluminum pipes with a lip on one end and then hook the throttle bodies to the manifold with hose couplers.

Mine were cheap because they are motorcycle throttle bodies which can be used on a honda car.. the CBR600F4i is a honda motorcycle that means that the throttle bodies' TPS sensor and things like injectors and FPR are compatible directly with a honda car.

home made setups rule...

I belive for a b series, you are better off witha set of hyabusa throttle bodies or some from a honda CBR900.. they are bigger.

[TheSilentChamber]

allright thanks man, I wasnt sure what the CBR600F4i infront of it ment lol. I'm looking for more of a prefabed complete kit.

[91civicDXdude]

This is a quick diagram i drew up to show you how they are put together. My kit comes with everything except for the actual manifold. Any competant machine shop should be able to weld it up.

[rushb18]

I know it says offer on this head but how much..


90 B18A1 head for parts only, casting is messed up. part out or buy whole. has all the rockers etc. make offer.

Do you have any more pics of it and what all comes with it i could use this if its cheap enough..Also will you ship it where are you located my location and zip code is 41017 Ky thanks later..

[91civicDXdude]

Originally Posted by rushb18

I know it says offer on this head but how much..


90 B18A1 head for parts only, casting is messed up. part out or buy whole. has all the rockers etc. make offer.

Do you have any more pics of it and what all comes with it i could use this if its cheap enough..Also will you ship it where are you located my location and zip code is 41017 Ky thanks later..

PM'd..

[1PhatCX]

i wish I had the cash man cuz those ITB's would be sold they dont look too hard to hook up. its pretty much a bolt on thing once you get the intake made eh?

[91civicDXdude]

Originally Posted by 1PhatCX

i wish I had the cash man cuz those ITB's would be sold they dont look too hard to hook up. its pretty much a bolt on thing once you get the intake made eh?

Pretty much. Theres some tuning issues, but thats to be expected when totally changing the airflow characteristics of the intake.

[1PhatCX]

yea
well if u havent sold them when i get cash then i'll talk 2 u about it k?