Super Charger question

[Pimpdady753]

ok i decied on a super charger for my car. now some people tell me you have to upgrade the cam and piston and gaskets and the manfold. other people tell me that you dont. what do you have to upgrade. and how hard is it to put all of this stuff in. thanks

[bigbob]

you dont have to uprgrade anything for low boost levels. lets start with what car you have. need to no to make a better call. you will need bigger injectors, and a new fule pump so ur not running lean. but that is all that you "need" to run enough boost for some nice power gains now if you gunna break the 10 # of boost the internals of your engine are gunna start to look shaky and will need to be replaced unless teh blower sucks and at 10 #s your not really getting the horsepower that you would with a vortech or procharger. cam intake heads, throttle body, and maf are all really good ideas to chang to and ur car will really get teh full benifit out of the blower but non of it is absolutly nessassary at low boost

[Pimpdady753]

Well my car is a 90 mustang, 5.0 5spd. i have headers, flowmasters, going to be putting on underdrive pulleys, this is the supercharger i want to get http://www.paxtonauto.com/supercharg...GetRecord&ID=1
it puts out like 10 to 15 psi, i think it sead like 100 to 175 hp. i dont want something to big right now.

[nvrenough]

Procharger will have the perfect supercharger for you. www.procharger.com