|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-12-2004, 09:59 AM
|
|||
|
|||
|
Brake light problems
Hello everybody,
I have a '95 240SX and the brake lights stay on constantly. I looked under the dashboard where the brake makes contact with the switch, and there are two switches. What are the two switches and which do I replace? Thanks in advance, the Capt. Last edited by captain1; 11-12-2004 at 10:46 AM. 
|
|
#2
11-12-2004, 06:01 PM
|
||||
|
||||
|
Wow... creepy! I have the exact same problem and I can't figure out what the hell it is either!
__________________
*Remember, straights are for fast cars, turns are for fast drivers!* 
|
|
#3
11-12-2004, 08:01 PM
|
|||
|
|||
|
Re: Stop light problems
you have to adjust it so that it will be the right length of being off and on. The switch pretty much will kill the power to the tail lights when it is not depressed. Just unscrew the adjusting nut under there and turn it around(while the harness is not connected to it)
__________________
Hiya... Need a FSM? Hit me up I'll send it to ya for FREE! I only have the 91-98 240sx, s13 ca18det, and s14 sr20det FSM Sorry no 89-90 yet.... Mods: Tein Flex with EDFC Hotshot Header R32 GTR Seats Advan SA3 16x7 16x8 Apexi Dual N1 Exhaust Silvia Front End Conversion Digital Climate Control Nismo 2-Way LSD Injen Intake w/ CAI 
|
|
#4
11-13-2004, 08:54 AM
|
|||
|
|||
|
Well I tried to manually push the switch and still nothing. I'm guessing the switch (either the one on the left or right) is probably bad. When the brake is not pushed, the switch is normally open. When the brake is pressed, that closes the switch and then activates the brake lights. I'll do more researching...
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
