|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Off-Topic Talk about anything other than cars. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
11-07-2004, 12:04 PM
|
|||
|
|||
|
5 Inch Monster Tach
Alright... I just bought a new talon and the kid i bought it from had a monster tach in it but uninstalled. He did not give me the directions. So anyhow there are three wires coming from it, a black, a red, and a green. I know that the green hooks up to the back of the gauge cluster. The black wire is the ground wire and the red I am clueless. If anyone has hooked one of these up please let me know where it goes. The black wire (ground wire) also controls the light... So the tach lights up, but does not read. Thanks alot...
__________________
AWD sold New car* 90' Eclipse Gs-T Shaved head with rebuilt motor Slowboy racing limited slip compression 165 across the board (: Fully ported Big 16g with 34mm flapper Precision racing Fmic Slowboy Boost controler set at 15lbs Custom 3 inch turboback Fully ported o2 housing Ported 2g manifold Slowboy racing UICP 3 inch hard intake pipe SAFC Autometer carbon fiber gauges Putting down a solid 300whp 1/4=13.7 at 109 That mph is good for high 12's with traction (: 
|
|
#2
11-07-2004, 03:45 PM
|
||||
|
||||
|
Re: 5 Inch Monster Tach
http://www.vfaq.com/mods/ecu-harness-1G.html
21 Crank angle sensor (RPM)
|
|
#4
11-07-2004, 08:06 PM
|
|||
|
|||
|
Re: 5 Inch Monster Tach
Thanks Joe...
__________________
AWD sold New car* 90' Eclipse Gs-T Shaved head with rebuilt motor Slowboy racing limited slip compression 165 across the board (: Fully ported Big 16g with 34mm flapper Precision racing Fmic Slowboy Boost controler set at 15lbs Custom 3 inch turboback Fully ported o2 housing Ported 2g manifold Slowboy racing UICP 3 inch hard intake pipe SAFC Autometer carbon fiber gauges Putting down a solid 300whp 1/4=13.7 at 109 That mph is good for high 12's with traction (:
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
<---call this number
