Tamiya CLK DTM Merc. I need help!

[Fizzychops]

Hi Al,

I am part way through this kit and have kit a snag. It is to do with the seatbelts. I have the Studio27 upgrade Photo Etch for it and have no idea where some of the belt parts go. The shoulder harness is easy. Does anyone have a picture and or information as to what the lower half of the seat tub looks like? Especially where the lower lap belts etc go into the floor?
Here is a link to the part at hlj. The belts are on the bottom of the fret.
Any information would be appreciated!

HELP!!!

http://www.hlj.com/cgi-local/hljpage.cgi?S27FP2437

[Jay!]

Which part do you mean?

I presume #3 are the shoulderbelts, and #2 look like the lap belts. If so, then what is #1?

[Jay!]

I found this page:
http://www.dtm.de/fanodrom/cockpit/index.html#

The Interior shots are supposed to open 360° views of the interiors... but they won't load on my machine. I've tried translating parts of the pages, but it doesn't say what plug-ins you need to view them...

From cosiness no speech can be with the workstations of the pilots. Loud, stickig and hot it happens. Temperatures up to 60 degrees make an incubator from the interior - an air conditioning system does not belong to the standard. With the help of our 360°-Kameras can take you exactly the bowl seats, Amaturen, switches, buttons and steering wheels of the DTM vehicles under the magnifying glass. Afterwards you also still the boxes of team Rosberg AMG Mercedes and team abbott sport LINE know an attendance abstatten.

After you entered down into a cockpit, click in the new window on the picture and keep you pressed the left mouse button. Thus each angle in the vehicle can be explored. With lower navigation you can ranzoomen and away zoom. The symbol with the white page leads back to the first adjustment.

Maybe it'll work for you...

[Fizzychops]

Number 1 is the one I want to know plus the two panels below on the right hand side. I assume they are the leg straps.

[COZMO6476]

i just picked up the same kit with the photo ecthing too... i was wondering how you shape the seat belts... anyone have experience with these photo etched belts?