how fast???

[N-sAiN]

hey...i was at the illegal tracks the other night and meet this guy that had a highly tuned ka24de he told me...he said that his car was very strong...i kinda believed him but im not sure if i would be able to beat him...i have a black top sr swap stock...and he has a whole bunch of stuff...he has soch pistons, all bolt ons (i/h/e), pulleys, altima or maxima cams(forgot which ones), and z32 injectors with a safc...that sounds like he'll be hella quick...i think he has more but how quick will he be runing in 1/4 and how much hp will he be pushing???i think i will lose, even though i have a turbo...hahaha

[SHO411]

Ka to me have more potential than an SR, but with no forced induction, I doubt, unless he has put a substantial amout of bolt ons and tuning.
I think you could take him.

[mrx7255]

It sounds like he would probably run something in the 14's in a quater mile
What do you run?

[240sxAddict]

it most be REAL FAST like like some FAST AND FURIOUS fast.lol

[SHO411]

Did you even see this guy run his car????

[N-sAiN]

i havent ran my car yet...i dont know wat times i will hit...but if u guys say that then he must be slow...hahaha...shouldve SRed it...hahaha...thanks peeps...i thought that all those stuff wouldve made his car go faster...i havent seen him run yet...but i think he say that he can take out na z32, hondas of course, but not the b20 swaps and the ls vtecs...i dont know wassup with him...i dont believe him n e more

[S13wanabe]

Damn straight he can't take LS/Vtec's. I'm just having fun. I have one so I like to hear good things about them. If he can't beat them then he's probably in the low 15 to high 14 range in the quarter. My Honda runs low 14's with an LS/Vtec and a couple mods. You can take him, no problem. Race his ass for 5G's.

[SHIFT_KA24DE]

yo N-sain is that your 240 in the sig? isn't that a s13 fastback with a s14 front?

dunno looks photoshopped but just wanted to ask...

[KenOhki2112]

Originally Posted by mrx7255

It sounds like he would probably run something in the 14's in a quater mile
What do you run?

I _seriously_ doubt said modified KA24DE would run less than 15.5 on the track.

Any more, why does he have the sohc pistons in his dohc? wouldn't that just lower the compression? That's not a good thing unless he's turbo, but he's not -.-

[nissanfanatic]

Originally Posted by N-sAiN

hahaha...shouldve SRed it...hahaha

Hahahaha....No.

He's probably full of shit. No need for any kind of injectors unless he's making more than 200HP, which he's not. An S-AFC is good for any car with an owner that knows how to use it. It takes a shitload of work to make a KA NA make more than 180WHP. You figure thats about what I make now with 5psi. SOHC pistons do raise compression. No street trim KA NA is making more than 190hp. It wouldn't idle correctly. Once again proving why small engines are much better off going with forced induction. I ran a 15.8 with I/H/E and toyos. I doubt he can take an SR.

[Ledzepig]

sorry to go off topic... but what kind of front bumper is that in your sig n-sain?

[Chuki_breath]

yea i would put money on you....but he may have a lil sneaky pete system ya never no....I NEED MORE NOS!!!!!!!!!!!

[KenOhki2112]

Originally Posted by nissanfanatic

Hahahaha....No.

He's probably full of shit. No need for any kind of injectors unless he's making more than 200HP, which he's not. An S-AFC is good for any car with an owner that knows how to use it. It takes a shitload of work to make a KA NA make more than 180WHP. You figure thats about what I make now with 5psi. SOHC pistons do raise compression. No street trim KA NA is making more than 190hp. It wouldn't idle correctly. Once again proving why small engines are much better off going with forced induction. I ran a 15.8 with I/H/E and toyos. I doubt he can take an SR.

Really? Sohc pistons raise compression? how much do they raise it? Yeah though, he's probably not very far under 16 seconds, if you know how to drive your car, you won't have a problem with him.

[TatII]

SOHC pistons are 8.8:1 i believe. also its pointless to run 370cc in a n/a 240. esp how it won't run unless its tuned. why would anyone spend 250 dollars an hour for a dyno tuning session on a n/a KA? all of his mods are contridictary.

he wants to run n/a but he lowered the comp. hes running larger injectors then neseccary. i was making around 200whp on my stock injectors making 7 psi. so his 370cc injectors are over kill as he will never get near that number.

i have a friend with a S14 here are his mods

injen cold air intake
hot shot headers
UR pulleys
light weight fly wheel
ACT clutch
alumium drive shaft
Z32 LSD
JWT ecu
B and M short shifter
N1 dual exhuast
both CAT's gutted.

his car can probrably run a low 15 tops.

his car felt extremely slow once you hit 3rd gear. he can only take out stock H22 ludes. ( thats really nothing to brag about )

[KenOhki2112]

Originally Posted by TatII

SOHC pistons are 8.8:1 i believe. also its pointless to run 370cc in a n/a 240. esp how it won't run unless its tuned. why would anyone spend 250 dollars an hour for a dyno tuning session on a n/a KA? all of his mods are contridictary.

he wants to run n/a but he lowered the comp. hes running larger injectors then neseccary. i was making around 200whp on my stock injectors making 7 psi. so his 370cc injectors are over kill as he will never get near that number.

Yeah, thats what I thought, I think sohc's are 9.1:1, and the dohc's would be 9.5:1 or some where around there.

I'm starting do doubt he can even get into the 15's with that kind of mess =\