|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| N2O | Turbo | Superchargers Tech forum to assist in Honda/Acura Performance. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
boosting high mileage b18
i have a b18b with 122k miles, i boosted it once b4, and the piston rings gave out. i was boosting 9psi. i want to replace the rings, and rebuild the engine so i can boost it again with new parts. would the 122k mile pistons and rods and crank hold up to 9psi.
|
|
#2
|
||||
|
||||
|
Re: boosting high mileage b18
im gonna say not on that motor. get some lower comp pistons and get some better info then try again
__________________
D16Y7/D16Y8 mini-me swap turbo coming this summer |
|
#3
|
|||
|
|||
|
Re: boosting high mileage b18
um . . . . yes they will, just change the rings if you are on a budget and clean the pistons up. It's not PSI you are looking for it's how much power can your stock internals withstand. there's a guy on HT running 20psi on a bone stock LS Motor with a perfect 12:1 a/f ratio but he's only making 314hp . . . . I think that's weird becuase I got a friend making 316whp off 10psi on a LS motor but his motor is built. basically though all and all yes your stock internals will be able to withstand 9psi. If people can run 12psi on stock D Series internals . . . . LS motors hav thicker rods and all so yo are good to go =)
__________________
Gen X Performance [email protected] aim:vtec92civic Custom Turbo Manifolds, IC Piping Kits, Hondata Units, Precision & Garrett Turbos, JRSC's as well. Rev Hard Stage 2 Turbo Kit Special (Ends June 31st) $2,775 shipped Drag Gen 3 $2,775 shipped |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|