|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-31-2004, 12:50 PM
|
|||
|
|||
no bus message 2001 stratus
my 2001 dodge stratus started to just die on me. and won't restart for like 20 minutes. will not even turn over and a message comes on that says no buS. Any help with this problem wound be great.
|
|
#2
11-04-2004, 08:24 AM
|
|||
|
|||
|
Re: no bus message 2001 stratus
Go to dealer and they will reboot both the computers. no bus means it lost comunication with both the computers.
|
|
#3
11-09-2004, 02:55 AM
|
|||
|
|||
|
Re: no bus message 2001 stratus
possible pcm...
|
|
#4
11-10-2004, 11:08 PM
|
|||
|
|||
|
Re: no bus message 2001 stratus
This is for a 98 stratus but it is a start~
NO: 08-31-97 SUBJECT: "No Bus" Message In Instrument Cluster V.F. Display DATE: Sept. 12, 1997 SYMPTOM/CONDITION: "No Bus" message in instrument cluster vacuum fluorescent display. DIAGNOSIS: Connect Scan Tool (DRB III). If DRB III indicates "No Bus" at cluster but can communicate with other modules, remove cluster and look for a hair-line metal sliver between terminal #4 and #5 of the blue wiring connector, refer to illustration. If a sliver is present perform the Repair Procedure. REPAIR PROCEDURE: This bulletin involves removing a hair-line metal sliver shorting the blue instrument cluster terminals. Break and remove a hair-line metal sliver shorting the terminals in the blue instrument cluster connector. See Figure 1. Install instrument cluster, verify "No Bus" Message is gone.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
