Keyless Entry Problem....

[Miller9779]

hey Guys,


I just lost my remote to my 2003 Chevy Tahoe. I bought a new one off ebay but my dealership wants $45 to reprogram it. I was wondering if any of you guys know how to program it without me spending 45 just to program the damn thing. If you guys could help me that would be greatly appreciated...

[Qbertsaok]

Do you have an owners manual? If so its in there under keys or program. .HERE ARE INSTRUCTIONS...

1- Close all the vehicle doors.

2- Insert the key into the ignition cylinder (do not turn on).

3- Press and hold the door unlock switch on door panel.

4- While holding the door lock switch in the unlock position, cycle

the ignition ON, OFF, ON, OFF.

5- Release the door unlock switch. The doors will lock and unlock

to confirm the program mode.

6- Press and hold the LOCK and UNLOCK button simultaneously on one

transmitter. After a delay of approx. 15 seconds, the doors will

lock and unlock to confirm the programming of that transmitter.

7- Repeat the previous step to program up to 4 transmitters.

8- Turn the ignition switch to the RUN position in order to exit

the keyless entry transmitter program mode.

9- Operate the transmitter(s) functions to verify proper operation.

[poongaga]

Help, I have a 99 tahoe and when I follow the directions, on step 5 my locks don't lock and unlock, and that is as far as I make it.

[Onblsht]

The 99-01 uses different instructions

[cbubya87]

I just purchased a '97 2 door and the previous owner didn't have either of the Keyless entry FOB's. Can you vouch for the instructions that the website thepartsyouneed.com provides with their FOB's? If not, does anyone know the instructions on how to program a '97?

Thanks in advance!