back seat

[vladlos]

hey guys, this is kind of a dumb question but..... is it legal or will my car pass inspection with no back seat? i know that its not legal to drive around in a crx with a back seat because of all the stories i heard around here. so i was wondering if it would be the same for taking out a back seat in my hatch legalwise. i'm just too lazy to search thru the law book thing for vehicles.

[YZ125rider21]

should pass long as you dont have anyone driving in the back when you go for inspection...haha

[Shaguar47]

As long as there seatbelts in the back, they shouldn't care

[tenz0]

this has been my interior for about 2 years, ive been pulled over a few times and nothing has been said about it...u should be ok

...just wondering - what front lip is that on your hatch in the sig..?

[Shaguar47]

Vladlos's lip is all custom i believe. Wasn't it home depot?

[tenz0]

thats what i thought, ive just never seen one painted..it looks good though

[vladlos]

kinda sorta.... i got this abs plastic stuff and i had to modify and trim it alot and i fiberglassed over it to make it sturdier.

[Masta]

damn, it does look good, i never noticed it before.

[tenz0]

is there a how-to on how to make those lips somewhere on this forum? i like it alot, it looks cleaner than any production lip for 4th gens

[91civichatch2571]

vladlos, is your car lowered?

[vladlos]

i wish, my car is riding on stock suspension. i'm trying to sell this buddy club front bumper i have so that i could get some new suspension but until i sell it, i'll still have my "lift kit" haha

[vladlos]

oh yea, and speaking of front lips....i searched around after i made mine and i found a site that sells 2 different kinds of front lips made from abs plastic.... http://www.allbodykits.com/ABS_Front_Lips.htm}
i think they're descent looking and they arent expensive

[tenz0]

yea ive seen those too, but id rather have no lip or one that looks like it just extends the front bumper down a little like yours

anyone help me out on how to do this..?

[vladlos]

this might sound gay but it took me a long time to get my bumper the way it is now. i've done the home depot lip before with base cove molding and i glued it on with liquid nails. when i glued it on i made sure that the top part of the molding was even with the bottom of ur air dam of ur bumper and it'll be a perfectly smooth transition. then.... i took fiberglass reinforced body filler and added it to make it smooth with the bumper. then i sanded it and then added some regular body filler to get it even more smoother and then i sanded it again. then i got some spot/glazing putty and filled in the imperfections and then i went and put some adhesive promoter on the bumper and primered it and then sanded and primered it again and left it that way for a while. the thing is tho, the molding is flexible so it will kinda get a tad bit wavy after driving around at high speeds.....so i took small 90 degree metal brackets and put them on the bottom edge of my front bumper and had them supporting the molding. after that it was all good and if u were to scrape when going over a speed bumper or something if ur car is lowered......then all it would do was bend in a little and then like spring back to its position. it was cool but then i wanted to make a lip, not just a bumper extension. so i just made a lip, about the same size and sawed off the extension that i made and then put my lip on. go to home depot or something and look in an office section and they should have abs plastic strips and then do whatever. i just added fiberglass and made it thicker on the inside of my bumper to add sturdiness. i hope this helps

[Hilikus Funkin]

its illegal to have a back seat in a crx? What if u put in the JDM backseat?