Defective Wiper motor 1999 Yukon Denali

[h20crft]

Does anyone know how to get a defetive wiper motor fixed under recall or service bulletin for a 1999 GMC Denali? There is a HUGE recall covering Chevy trucks and SUV's for the same exact problem going back to the early 1990's. Basically, the wiper's work intermittently and often stop in the middle of the window. The dealer has been completely useless and won't look past the Vin number not being on the recall list.

Any help would be greatly appreciated.

[bpnsd]

FYI, if your dealer looks past the VIN and completes the repair at no charge to you GM will not reimburse the dealer for the repair.

[Sirfishalot]

Anyone have info on a recall for this problem on a 92 Yukon?
Thanks

[TheArkMan]

My wipers do this, yet, they are going (at full speed) stop suddenly and start again.. is there a recall on this?

[lodownlv]

it is a cold solder joint on the wiper controle board

[010175]

Just found the post and copied them for your reading. You might try it.
Post one
Just take the time to resolder it better, it seems the factory cold soldered them and thus they develop hairline cracks, The board is not damaged just needs a better solder.
Post two
Thanks for your advice, last night I removed the wiper delay board and repaired it. I re-soldered 4 or 5 of the connection spots and cleaned off the contactor tips that touch the rotating gear inside the box. It all works fine now!

Dave