|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-08-2004, 10:29 PM
|
||||
|
||||
|
wheel width?
Has anyone here put 31X10.50 size tires on the early style 15X7 factory isuzu aluminum 6 hole wheel?
thx, Matt
__________________
97 Rodeo 4x4 3.2 SOHC V6 191k and running strong  31x10.50 Maxxis Buckshot Manik grille guard 100w hella drining lights 
|
|
#2
10-11-2004, 08:34 AM
|
|||
|
|||
|
Re: wheel width?
Yeap! Had the aluminum's 15x7 on my 1st Rodeo, 91 V6.
Came from the dealer with 31x10.50's Goodyear Wrangler if I remember right, (the tire). The size was for sure 31x10.50, still have all the paper work.
__________________
1997 3.2L V6 Rodeo  32" Yoko's, 16x8 MB Wheels, 2" lift, Brushguard, KC Fog's, Loadwarrior Rack On it's way to 185k strong  2004 3.4L Tacoma TRD off-road 4x4 Double cab  32" Yoko's, Westin Bull-bar, KC Fogs 60K miles 
|
|
#3
10-13-2004, 10:50 AM
|
||||
|
||||
|
Re: wheel width?
thx for the reply, I called the cooper info line and the guy told me that 7" is a bit on the narrow side for a 31x10.5 but he probably has never seen the effects of what he was talking about! anyway, did you have any unusual wear pattern? did the middle of the tire wear out quick?
__________________
97 Rodeo 4x4 3.2 SOHC V6 191k and running strong 31x10.50 Maxxis Buckshot Manik grille guard 100w hella drining lights
|
|
#4
10-13-2004, 11:22 AM
|
||||
|
||||
|
When I owned my '87 Trooper, I found a nice set of Toyota steel wheels (15 x 8) and installed 31 x 10.5 Cooper Discoverers on them. It looked great, and the wheel width was just right. I would agree with the people at the information line that a 7 inch wheel is on the narrow side. It will work, as RF said, but the tire will be "pinched in" to fit the wheel. It wouldn't look right to me, but that's just my opinion.
Dale
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
