-
Grand Future Air Dried Fresh Beef Dog Food
Air Dried Dog Food | Fresh Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Toyota > 4Runner/GX470
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 09-30-2004, 12:55 PM
GmeMstr GmeMstr is offline
AF Newbie
 
Join Date: Sep 2004
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
98 horn/cruise/air bag doesn't work

Hi all!

I have a 1998 4runner that is having what I guess is an electrical problem.

Everything forward on the steering wheel is non-functioning. This would include the horn, air bag, and cruise control. I'm assuming the aor bag doesn't work, as the airbag light on the dash stays on. I have removed the column housing and checked the connections and relays and all seems okay. There are no fuses burned and the wiring appears intact throughout.

Has anyone seen this before? Is it a computer thing? I would hate to take this to a dealer and have them bug-hunt for 90.00 an hour.

Any help would be appreciated.
Reply With Quote
  #2  
Old 10-05-2004, 05:53 PM
GmeMstr GmeMstr is offline
AF Newbie
Thread starter
 
Join Date: Sep 2004
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 98 horn/cruise/air bag doesn't work

Any ideas? Anyone? Bueller?
Reply With Quote
  #3  
Old 01-31-2005, 03:17 PM
GmeMstr GmeMstr is offline
AF Newbie
Thread starter
 
Join Date: Sep 2004
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 98 horn/cruise/air bag doesn't work

Just bumping to the top...any ideas folks?
Reply With Quote
  #4  
Old 01-31-2005, 03:55 PM
4Wheel's Avatar
4Wheel 4Wheel is offline
AF - Advisor
 
Join Date: Dec 2004
Posts: 506
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 98 horn/cruise/air bag doesn't work

Yes! Your right the stealer will charge and charge you and then tell you they can't find it after all.
So order the Factory service manuals ALL THREE. Then go get a GOOD multi-meter, not a cheap $3 one at Kmart but a good one with an audible continuity checker.
Then open the schematics and find the common circuit between all your dead circuits and start there.
The labor rate: 1 beer an hour, when you pass out it's time to quit for the day.
It will be a confusing and arduous task but you will get it and learn a lot too.
Good luck
PS wasn't to serious about the labor rate but treat yourself to some of that $90/hr your saving!!!!
Reply With Quote
  #5  
Old 01-31-2005, 04:16 PM
4Wheel's Avatar
4Wheel 4Wheel is offline
AF - Advisor
 
Join Date: Dec 2004
Posts: 506
Thanks: 0
Thanked 0 Times in 0 Posts
Factory Schematics ONLY!

Factory Schematics ONLY! The other aftermarket schematice are a pure waste of time, each year and model are different in their wiring and the Haynes and Chilton books try to cover ALL models over a mutiple year span by "combining" the schematic pages.
This will cuase anyone a lot of wasted time chasing or looking for wires that don't exist or are elsewhere in the harness.
Been there done that many years ago with a haynes manual I watched it slowly burn in my fireplace, it was the BEST use I got out of that manual, it warmed me up after replacing a timming chain on a 22RE.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Toyota > 4Runner/GX470


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:08 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts