|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Cutlass Series Includes Cutlass Ciera, Cutlass Cruiser, Cutlass Calais, Cutlass Supreme, Custom Cruiser, as well as the GM N-Body subforums. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
09-28-2004, 11:18 PM
|
|||
|
|||
|
1993 Cutlass Blower motor
Blower motor is dead. How difficult is the removal and repair? My son is coming over this weekend and wants me to help him. I want to remain the "smartest dad in the world". All help will be appreciated.
|
|
#2
09-29-2004, 12:38 PM
|
|||
|
|||
|
Re: 1993 Cutlass Blower motor
It's been a while since I've worked on one of those but from what I remember, it's right behind the alternator. I'm assuming that you have a 3.1 V6 in there. I think you'll have to remove the alternator and possibly the bracket to get enough room to remove the blower motor. Make sure you disconnect the battery before removing the alternator. The blower motor is held in by 6 or so bolts - not very hard to do once the alternator is out of the way. Good luck.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
