|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
09-19-2004, 12:35 AM
|
|||
|
|||
|
cam help
ive been reading up on cams lately, and they look like a better investment than rockers. i was looking at the gt1 and gt2 cam. with the gt1 could i just put this in with no aftermarket pushrods, or springs (i would most likely put 90 or 105 springs in anyway)???? Also if i go w/ the gt2 cam what supporting mods would i need to run that? got about $100 in the gp fund, so im only a few hundred away, and i start my second job( paid realestate interenship next week) so thats all cam and moding money!!!!!!!!
|
|
#2
09-21-2004, 09:23 AM
|
||||
|
||||
|
Re: cam help
The 105 springs are a good bet. The cam will give more power than the rockers, but the rockers can be done by yourself in an evening with a case of beer. The cam is at least 18+ hours and you'll need help. GT1 cams generally won't set an engine code where the gt2 cam will. To have the cam installed will cost you at least $500 to have some one do it. Also if you later want to upgrade to a turbo kit, the after market cam does not play well with them. Do you drive a GTP or a GT? That also comes into play.
|
|
#3
09-21-2004, 11:14 AM
|
|||
|
|||
|
Re: cam help
i got a gt, and i dont think ide go to a turbo kit in the near future. Do you know anyone in the milwaukee,wi area that does cams?
|
|
#4
09-21-2004, 12:42 PM
|
||||
|
||||
|
You might want to try one of these.This is from the Intense site and they say that the price for a cam install is 500 bucks (plus materials plus sales tax)
Please email [email protected] or [email protected] for all installations in Wisconsin, specializing in L67-swaps.
__________________
 ClubGP Member 6530 Since 2001
|
|
#6
09-21-2004, 07:32 PM
|
|||
|
|||
|
Re: cam help
how much will this hurt my engine if i put a cam in? Because this is my daily driver, so i need it to stay around for a while.
|
|
#8
09-21-2004, 08:19 PM
|
|||
|
|||
|
Re: cam help
well it looks like im lookin at 1000 or so for a cam set up instaled. maybe i should just save a few more thousand and do a l67 swap or a turbo. whats the best overall turbo kit out??
|
|
#9
09-21-2004, 08:30 PM
|
||||
|
||||
|
Quote:
http://www.pfyc.com/store/merchant.m...y_Code=GPUNDER 
__________________
ClubGP Member 6530 Since 2001
|
|
#10
09-21-2004, 08:40 PM
|
|||
|
|||
|
Re: cam help
damn!! someone wanna loan me about $3075
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
