Need an intake tube

4GZChatch · #1 02-07-2002, 02:46 PM

Hey guys, I'm new around here, but I hear that this is the place for those who knows. I need an intake tube that will fit a 1989-1991 crx or civic Si. I only need a new tube, and I already have the fittings and filter... And I need it cheap. It doesn't matter what brand or anything, just a 3" tube. Get ahold of me if you can help me!!!

90CRXZCSi · #2 02-07-2002, 03:40 PM

try to check out www.speedandstyle.com for a tube for cheap.

SkyNex721 · #3 02-07-2002, 08:46 PM

Why don't you make your own CAI. You can make it for about $75. Since you already have the filter, it would be even cheaper then that. You can order the tubing from JC Whitney. All the details are in the how to section.

90CRXZCSi · #4 02-07-2002, 08:57 PM

Quote:

Originally posted by SkyNex721
Why don't you make your own CAI. You can make it for about $75. Since you already have the filter, it would be even cheaper then that. You can order the tubing from JC Whitney. All the details are in the how to section.

Actually....that would be a good idea too. i think it would be alot harder to make one for a CRX though because of all the bends it needs.

SkyNex721 · #5 02-07-2002, 08:59 PM

The article it shows you how to make the tube so that it fits around the curves. And it's all from a single piece of tubing.

4GZChatch · #6 02-08-2002, 10:45 AM

Can you be a little more specific? I have looked all over JC Whitney's site, and can't find any tubing anywhere. Also, you said it is in the how-to section. Is that on JC Whitney's site too?

SkyNex721 · #7 02-08-2002, 10:54 PM

Here's the link. Just read it. It tells you everything you need to know.
http://www.teamdelsol.com/howto/coldair/diycoldair.htm

kris · #8 02-09-2002, 01:31 PM

Good to see you on the boards here.

Now, hopefully one of the many people here can help you out.

POST REPLY TO THIS THREAD