ran a 14.3 at the track last night

[2kBlkGTP]

yesterday i ran a 14.3 with a DHP 1.0, dynomax cat-back, FWI and ZZP stage 1 throttle body...not to bad for so little mods..tomorrow my Random Technology downpipe - high flow cats and u-bend delete. hopefully bring me below 14 or 14flat ne1 have any guesses to what i'll run next time?

[jeffs_GTP_sleeper]

Originally Posted by 2kBlkGTP

yesterday i ran a 14.3 with a DHP 1.0, dynomax cat-back, FWI and ZZP stage 1 throttle body...not to bad for so little mods..tomorrow my Random Technology downpipe - high flow cats and u-bend delete. hopefully bring me below 14 or 14flat ne1 have any guesses to what i'll run next time?

Nice times. With the new downpipe/high-flow cat(or no cat)/U-bend you definitely have a chance at 13s. Especially if the 14.3 was on a 2.2+ 60'

What was your 60ft and trap speed? You have a 3.4 on it right?

[Ripn12s]

Stock pulley or 3.4??

Good job.

[boots03]

damn, then i own a factory freak, i run a 14.49 in the 1320, and im bone stock

[2kBlkGTP]

as of now i am running that with the stock pulley...i think my 60' time was like 2.166 and trap speed was like 96mph i will get my time slip outa my wallet its somewhere in my room right now...i have a 3.25 pulley(not installed) but i think that is too small i dont want KR so i am looking to buy a 3.4..i think i had a good time for a stock pulley, i will go get my timeslip now i'll post everything in a sec.
Chris

[2kBlkGTP]

OK i found my timeslip..here it is
R/T - .511
60 - 2.116
330 - 5.986
1/8 - 9.227 MPH - 76.20
1000 - 12.013
1/4 - 14.344 MPH - 96.55

[jeffs_GTP_sleeper]

Originally Posted by 2kBlkGTP

as of now i am running that with the stock pulley...i think my 60' time was like 2.166 and trap speed was like 96mph i will get my time slip outa my wallet its somewhere in my room right now...i have a 3.25 pulley(not installed) but i think that is too small i dont want KR so i am looking to buy a 3.4..i think i had a good time for a stock pulley, i will go get my timeslip now i'll post everything in a sec.
Chris

That is a great time for a stock pulley and your mods. With the 3.4 and those other mods I would be real interested to see if you get to the 13s.

And the 14.49 is a great stock time as well, good job. Put some mods on it!

[2kBlkGTP]

well do u think i'll get into the 13's with the RT downpipe and a 3.4 pulley? or even just the downpipe?

[jeffs_GTP_sleeper]

That would be a feat if you could get 13s on the stock pulley and tires.

Originally Posted by 2kBlkGTP

well do u think i'll get into the 13's with the RT downpipe and a 3.4 pulley? or even just the downpipe?

I think it will take both, but maybe with just the pulley and a slightly better launch.

Good Luck!

[2kBlkGTP]

oh but i will try to get 13's with stock pulley and tires

[kustomkid54]

I don't think your going to make it with a stock pulley. But good luck. Let us know.