S15 HLSD Hhelical Diff in a S13

[racerxx]

I have a diff with a welded spider gear in my 1989 Road race track car now and am looking to put in a S-15 HLSD guts I have. I have gone through the archives for most forums,
am not found a definitive guide to what I need to do to put one in. I know I need S-15 output shafts. What else to put it into the S-13 pumpkin?
Do I need to change anything else on the car? Where can I get a Good price on S-15 output shafts?

What I have been told from the 240sx clubs/forums is that to put a S15 Helical LSD (guts) in a S-13 Pumpkin
you need a set of S15 output shafts
or that a 90-96 Non Turbo 300ZX output stubs fit? But Aren't the 300zx too longfor a S-13?
Wern't Helical LSD's used only in some of the S15's?
Are these output shafts differnt than the rest of the S15's?

Also I have been told to get a 30 spine-30.75mm dia. outputs?
Part Number Right flange: 38220-29u00
Part Number Left Flange: 38220-29u01


Is any of this correct?????

Since S15's were never brought here, All is hear say here in the US.
What I need is the S-15 correct shafts or a Nissan/Nismo PN, or
a USDM shaft that will work.
Help !!!
Thank you!
John
#29
Race for Kids Enduro Team
[email protected]

[R.W.240]

or you can save youself the trouble of sourcing/importing/ghettorigging an S15 Helical and get a Quiafe

i dont know if any of that is true and it looks iffy. JDM axles/outputs have different bolt patterns for one and i know that the Turbo Z uses a completly different Pumkin than the S chassis but i dont know about the N/A.

[racerxx]

I already have the Hlsd. We are on a Tight budget and so far can get Kaaz or Qualife to donate a diff. We have the HLSD and multipe pumpkins so we were going to try and get output shafts....but what?

Thank you
John

[SR20DETpower]

Most people that I have heard of putting in a S15 diff usually put on the entire rear subframe.....

you defintely need the axels for the diff side that are made for it.

[R.W.240]

yeah i caught that Dousan on Zilvia.net was doing that.

Anyway... If you manage to get the S15 Diff in your current housing your gonna need more than Output Shafts. The JDM Outputs / Axles have different Bolt patterns than The USDM ones for one. Plus the S15 has more suspension parts in common with the S14 than the S13 i.e - the JDM S15 Axles will probably not fit.

[racerxx]

Hello,

I don't have any Japanese contacts.
At least I now have a picture of what we need !

Diagrams for a 89 S13 and a S15 Below link/Image

http://www.imagestation.com/album/?id=4286002515

This is for a S15 Turbo with a HLSD from a Australian Nissan Dealership.
Australian Nissan PN's

38220, 38220+A

Does anyone have any sources in Japan or know of any where to refer me to ???


Thank you very much for any help!
John
#29
Charity Race for Kids Enduro Team

Please Become a Done Marrow Donor!
http://www.marrow.org/

[HighwayRacer]

Go to SPLparts.net, and give them a call, ask for Alan. He knows more about Nissan Suspension than anyone I have ever met, and they will get you anything you need at a very good price.

[HighwayRacer]

(866)SPLPart, thats their phone number