|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
02-01-2002, 02:03 PM
|
|||
|
|||
About how much from cam?
so how much of a gain should i expect to see in my d16a6 with a new cam? nothing too aggressive but more so than stock, mated up with the few light modds i have. and who should i go with for the cam? my uncle owns a shop so i can get all my parts extremly cheap.
oh yeah something else i was wondering... would one benifit at all if one were to put a ls ecu in for the a6 like it does with the ZC or is that kinda pointless.
__________________
90- crx si w/ a D16a Vtec and a few goodies, oh and 60k miles on it heh 
|
|
#2
02-01-2002, 02:24 PM
|
|||
|
|||
|
My buddy had a d16a6 with a webcam in it and he ran a 15.5 at the track. He then blew it up and put in a zc. Guess what he only ran a 15.2 with the zc.
 This was all in an 89 si hatchback.
__________________
91 civic 4dr b16a 14.8@94
|
|
#4
02-01-2002, 02:26 PM
|
||||
|
||||
|
...check out the sites that are sellin the cams....they should have a general hp increase listed...who knows how accurate it is though. but aside from turbo or swapping, that's really the only route you've got left, so I'd go for one
__________________
SOLD! 
|
|
#5
02-01-2002, 02:30 PM
|
||||
|
||||
|
Exactly. Who knows how much of an increase it will be, but of course better than stock. It wont be as much as a DOHC but it will definitley give some power to ya.
__________________
2004 Sonic Blue Ford Ranger XLT 2001 Liquid Grey Metallic Ford Focus ZX3 1995 Integra GS-R - Parting out
|
|
#8
02-02-2002, 03:33 AM
|
|||
|
|||
|
I've built some good D16A6 setups. I use just this one special grind. My setup is pretty much, lightened car, I/H/E cam, headwork, stock bottom end. Pulls 138 hp to the wheels.
best time is 13.6 about 3 years ago. i havent touched the setup since and still does 13.6 to this day. Feel free to email me at [email protected] or [email protected] try the yahoo.com first since the exospeed email is having intermittent problems. also check out the site www.exospeed.com Wil www.exospeed.com
|
|
#9
02-02-2002, 08:34 AM
|
|||
|
|||
|
thanks... you've got mail....
and i'm not really looking for specific numbers just ballpark
__________________
90- crx si w/ a D16a Vtec and a few goodies, oh and 60k miles on it heh
|
|
#11
02-03-2002, 11:08 PM
|
||||
|
||||
|
hey jeef are all those mods done on your si engine? how much hp are you pushing out? how many miles on the engine
__________________
 AF Teen CrewPurehonda.com - may she rest in peace 1996 Chevy C1500, Flowmaster Exhaust, Tinted Windows, 2 Kicker 10" L7 Subs, Eclipse 5v headunit, Alpine V12 Amp DJM 4/6 drop kit being sold Full Throttle 9.5 inch lift being installed 1989 CRX si "silver mist"---SOLD---.....Stripped and Wrecked in Compton corbeau forza 2 seats, DC short shifter, Powerslot slotter rotors, AEM brake pads, Bfgoodridge Stainless steel brake lines, Greddy MX exhaust, AEM Cold Air Intake, Konig Rated-R rims, Kamikazi header Make an Offer [email protected]
|
|
#12
02-04-2002, 01:58 AM
|
||||
|
||||
|
theres this little asian dude who drives around a b16a rex thats gutted....handed me my ass then i talked to him after..he said with his old bullfrog cam and a sprocket on his stock si engine with i/h/e , he was beating new si's, and a couple gsrs...dont know how much water his story holds though:grey:
|
|
#13
02-04-2002, 09:30 AM
|
|||
|
|||
|
Quote:
yes, don't know, and around 102k
__________________
90- crx si w/ a D16a Vtec and a few goodies, oh and 60k miles on it heh
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
