Lets play name that turbo

[Midnight_Outlaw]

Ok so i got this turbo with my turbo kit and i searched all the #s on the google and found nothing. I was wondering if any of you know what turbo i have.
# on the air side
49178-5770 2a10a

# on the barring side of the exaust side
DUCM
22JC ? (that might be a C its kind of grinded off)

#on the other side of the exaust side
(Mitsubishi logo) 78-14300

So does any one know what one it is by any of these #'s?

Also to adjust the waste gate on this, do i just adjust the nut down at the end of the rod where its attached to the waste gate its self?

[eclipsefan98]

might be a Mitsu 16g or 20g. check those numbers against your turbo.

[LandoAWD]

So, you bought a kit with an unknown turbo, post no pics, and we have to guess the make?

[Midnight_Outlaw]

That is the name of the game But well i do have a pic but its kind of small and really shows a bunch of nothing.

Its supost to be a hahn turbo kit. So it should be a 16g but i cant find the 16g on it any where. or any g's or b's or even an h.

Here is the picture of it, you will probly have to open it in your browser.


http://i6.ebayimg.com/02/i/02/0d/70/32_1.JPG

[LandoAWD]

It looks like a 20g.

[Midnight_Outlaw]

I would crap my pants if it was a 20g, but that is way more then i need. I can only run 10psi!!

[Midnight_Outlaw]

Ok so i guess that isent all that important, but i dont have to know will it fit on a T3 manifold flange? it looks like its the same but i want to know for sure

[JoeWagon]

yes.

[kjewer1]

That is a tdo6 20g compressor housing. Cant see the turbine inlet, if its round its mitsu, if its sqaure its t3. Cant tell you anything about the wheels from that pic though.

[EclipseRST]

hey scott... email me your email address or go on AIM, i have a question for you! my email is: [email protected] and my AIM name is: RST Eclipse GST

[Midnight_Outlaw]

20g hun, well thats going to give me some lag. Ahh well i can always put in rods and pistions in some day, then crank up that boost.

I sent you a e-mail mr rst.

[LandoAWD]

Originally Posted by Midnight_Outlaw

20g hun, well thats going to give me some lag.

You have a V6, right? The Avenger?

I spool my 20g by 35-3800RPM on a 1997cc 4cyl.

[Midnight_Outlaw]

No no thats my old car, i bought a talon. Maybe i should update that page.

[kjewer1]

20g is perfectly streetable, I didnt feel it was laggy at all, even with the tdo6H turbine wheel.... ~37-3800 rpm to 25 psi.

[Midnight_Outlaw]

LoL well even if there is some ill get over it, It will always be there ready for me when im ready to pump up the boost.

Like i was asking earlier though, how can i adjust the boost? I know if i get a boost controler. But what can i do to the waste gate to adjust the boost?