|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
07-10-2004, 05:06 PM
|
|||
|
|||
New to forums
Just posting to say Hi!
Also a few questions. I got a smog test done today and I failed its. What I failed was the NO(PPM) part. I was wondering what that is. The smog test guy wasnt too helpful..... MAX - 859@15mph, 798@25mph AVE - 237@15mph, 199@25mph MEAS - 1568@15mph, 584@25mph Failed 15mph, but passed 25mph. I live in California with the screwed up smog laws.  Also if i was to get a b18c5 will my header still fit or do I have to get another kind? 89 Civic HB SI Thank you! 
|
|
#2
07-10-2004, 05:32 PM
|
|||
|
|||
|
the NOX is the Oxides of nitrogen, ppm stands for parts per million if the NOX is high its due to higher cylinder temps, so prob an egr or car was runnin for a while before u got the test, or maybe he dident put the fan in front of the car like hes suppose to. shame the dude that does the test dont know you, if he was your bddy all u=youd have to do to get it to pass is run a tube from the exhaust into where the pcv goes on the intake and itmake it pass
|
|
#3
07-10-2004, 05:36 PM
|
||||
|
||||
|
Re: New to forums
so happy i don't stay in Cali...
__________________
The name's Adrian 1990 Civic HB Si - 265.7whp/223tq @9.2psi. Tuned on NepTune by J.Mills 1991 Civic Sedan DX - 296.3whp/230tq @1bar. Tuned on NepTune by J.Mills 1991 Civic Sedan DX - 185.8whp/139tq. Tuned on NepTune by J.Mills 2006 G35 Coupe 6MT - Stock 2011 CR-Z - Stock
|
|
#5
07-10-2004, 10:18 PM
|
||||
|
||||
|
congratts on the test and welcome to the fourms
 and the header will not fit. cant mix d with b
__________________
_________________________________http://VelocityFactor.com________________________________ 1990 si hatch b20b si tranny megan race header 2.5 custom exhaust 50 shot integra da rear disk (w/ 4040 valve) powerslot rotors and barded lines all around 1994 Dx hatch stock
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
