rb25det in an s13

[mongooze]

can i drop a rb25det in a s13 with no troubles?

how much horses can i get out of the rb25det?

how much with stock internals?

can i put an s15 conversion in a s13 chassis?
is it pretty simple or is it kinda of hard.

[logik23]

3 letters man, F A and you guessed it, Q!!!! That spells FAQ!!!!!!!!

[nissanfanatic]

Originally Posted by team_redline_z

can i drop a rb25det in a s13 with no troubles?

No. There's no such thing as modifying a car without troubles, much less an engine swap. You will always run into something

Originally Posted by team_redline_z

how much horses can i get out of the rb25det?

Horses is not a unit. HP is. There is no set limit

Originally Posted by team_redline_z

how much with stock internals?

I have heard around 500-600. If that is the case, then 400 reliably everyday. Do some research.

Originally Posted by team_redline_z

can i put an s15 conversion in a s13 chassis?
is it pretty simple or is it kinda of hard.

Yes. It depends on how intellegent you are. It might be kinda simple or pretty hard if you don't know how to use a wrench.

I apologize if I could not help you, but the FAQ is there to keep idiots like me from mis-informing you.

[logik23]

Actually, RB25DET are pretty weak, they can't hold more then like 300-350p, or so I heard. I think it's the connecting rods, you can like bend them with your hands or something.

[nissanfanatic]

Why don't you run over to http://www.240sxforums.com/forums/sh...tock+internals
and tell all of them that they are wrong.

[SR20DETpower]

what did that other thread have anything to do with this topic?

dumbass made me read that whole page like I was going to miss out on something and in the end its OT..I say we load this guy into a cannon and smash his fucken head into a steel wall.

[nissanfanatic]

Originally Posted by SR20DETpower

what did that other thread have anything to do with this topic?

dumbass made me read that whole page like I was going to miss out on something and in the end its OT..I say we load this guy into a cannon and smash his fucken head into a steel wall.

Originally Posted by logic23

Actually, RB25DET are pretty weak, they can't hold more then like 300-350p, or so I heard. I think it's the connecting rods, you can like bend them with your hands or something.

To show the knowledge king that RBs can handle around 500hp on stock internals.

[logik23]

http://www.automotiveforums.com/vbul...d.php?t=198932

Take a look at #2 in Razor's last post.

[nissanfanatic]

www.night7racing.com/faq.html

Thanks for the read on the connecting rods though.

[logik23]

Well I just based my opinion on what Razor and a few others said, but I guess this guy knows what he's talking about, and besides, this is better cause I want an RB25DET.

[nissanfanatic]

That is just saying that the engine can handle it. That doesn't mean it will be reliable. If what razor said is true, then I would keep it to a nice 400hp.

[logik23]

I wouldn't want more then that anyways.

[mynismo]

Originally Posted by logik23

Actually, RB25DET are pretty weak, they can't hold more then like 300-350p, or so I heard. I think it's the connecting rods, you can like bend them with your hands or something.

ok. i just wanted to say that you don't know shit.

[Fully_Sick]

rb25det's do especially well in a 240 if your going drag. The extra cylinders DO make a difference...

and as for speed the rb25det stock walks on most modern day v8's stock[well here in Australia at least].

[logik23]

Originally Posted by mynismo

ok. i just wanted to say that you don't know shit.

As I meant by saying "I THINK" and "OR SO I HEARD", is that it's something I HEARD and I was just saying it to see if it was right. And I'm sorry that I'm not an RB25DET encyclopidea like you. I mean you must have a lot of time to think working your double shifts at McDonalds for the 12th year in a row because you have a grade 8 education, but I don't have that kind of time.