Help with Foglight Install

[MLodsin]

I just bought some PIAA driving lights and have some questions about the installation. My first question is how do i get the wires through the firewall into the passenger compartment? i cannot find where to put it through and the instructions are not specific to vehicle so they are no help.

My next question is about another wire. the Instructions say "connect the switch power wire (H) to power source. Legal operation of these driving lights requires that the power source be one that is only powered (+) when the high beam of the headlamps are on." Where should i plug this wire into?

thanks for your replies and any websites detailing the install would be helpful.

[xivera]

Doesn't PIAA have wireless units? http://www.piaa.com/accessories.html
I would use those...

[MLodsin]

well i already have the lights and i dont feel like waiting anymore, the lights were backordered for about a month. Hasnt anyone here installed their own fog lights?

[nittanys1]

yeah, I've wired my own fog lights...infact I JST gt one doing them. As far as how you should wire your lights DONT wire that one wire to the high beams cuz then the fog lights wil not work unless the high beams are on...rather find the (+) wire that goes to your low beams and connect your wire to them that way when you put on your lights your fog lights should come on....

Good luck and if you have anymore questions email me at: [email protected]