|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
Need a S14 speedometer for a S14 SR20 swap?
Do you need a speedometer from a S14 SR20DET to work on a 95-98 240 (S14) SR20DET swap? Or can you just use the 240 one?
__________________
dsm97gsx is now youngmanvr4. 94 vr-4 with 58k. Mods: K&N FIPK, HKS EVC IV, HKS boost gauge, testpipe, EGR by-passed. Sound: Profile Chrome and Gold amplifier (200W) and (2) 10" Red Cone Sony Xplod Subs. Coming soon: Stillen downpipe, DN rear pre-cat, Defi boost and EGT gauge's with control unit on A-pillar.
|
|
#2
|
|||
|
|||
|
Re: Need a S14 speedometer for a S14 SR20 swap?
Anyone? I'm guessing that you dont have to...but i have seen some 240's with a SR20DET and have a speedometer that go's up to 140mph but i dont think that the 240's go's that high.
__________________
dsm97gsx is now youngmanvr4. 94 vr-4 with 58k. Mods: K&N FIPK, HKS EVC IV, HKS boost gauge, testpipe, EGR by-passed. Sound: Profile Chrome and Gold amplifier (200W) and (2) 10" Red Cone Sony Xplod Subs. Coming soon: Stillen downpipe, DN rear pre-cat, Defi boost and EGT gauge's with control unit on A-pillar.
|
|
#3
|
||||
|
||||
|
Re: Need a S14 speedometer for a S14 SR20 swap?
Itll work with any cluster, but if you want original JDM then you can get a JDM gauge cluster or you can use your stock one but I'm not sure if it connects the same and you'll have to have it set up for the new engine I think. Or you can just buy and aftermarket speedo.
__________________
![]() ![]() ![]() ![]() ![]() ![]()
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|