1999 g20 no mods. need help

[BIGbungy]

Ok, I'm in need of serious help. As mentioned above, I have a 1999 g20 with no mods. I want show and go, but I can't seem get any prices and to be honest I don't know where to start. I'm just looking for a mentor thats all, thanks.

[gdalton]

Welcome always glad to see new members, you have come to the right place, most of these guys here know way to much about cars so I'm sure you can get plenty of help. If you haven't already checked out g20.net have a look there for some ideas and links to aftermarket dealers also have a look at se-r.net for other stuff related to our cars. Have fun and good luck on your project.

[BIGbungy]

Hey thanks! I've been to the g-20.net site, its great but lacking in the aftermarket stuff, Stillin is ridiculous in $$ to put it lightly. I have a fair amount to put into this car, any ideas at all?

[primera_gte]

you can give your g20 and money to me and i'll mod the car for you.

check out se-r.net. the sentra uses the same engine.

[gdalton]

Well for go ideas I would say if you want to keep in NA then go with AEM cold air intake, Hotshot headers, JWT S3 cams, and greddy exhaust and if you want to have it forced induction then go visit Hotshot for a turbo application. On the show side I wouldn't know, if you want to lower it then get the Tein setup at digitalracer.com, get some rims (your choice) tint the windows and for body kits I personaly would only get the Wings West front lip but Stillen and many other companies have body kits but I haven't looked into them so I can't say wich ones are nice and affordable. Hope that helps.

[Mrcoilover]

These are your basic begining mods.

*Hotshot CAI-$215
www.hotshot.com
Or JWT popcharger filter-$(TBA)
www.jimwolftechnology.com
*Hotshot Header-$475
(^^^)
*Greddy Evo Catback Exhaust-$539
www.digitalracer.com
*Unorthodox pulleys-$215
www.nopi.com
*Eibach or H&R springs-$268/ $200
www.nopi.com
*KYB AGX adj shocks-$250-300
www.kyb.com
*Decent pair of rims (17's w/tires)-$1000-1500
www.wheelmax.com

Choose all of the above you have a nice looking and car.reasonably faster car.:smoka:

[BIGbungy]

suppose i do those, would it also be possible to drop a hotshot SR20DE turbo system made for the sentra in it?

[Mrcoilover]

Originally posted by BIGbungy
suppose i do those, would it also be possible to drop a hotshot SR20DE turbo system made for the sentra in it?

My bad, I misunderstood. You have a FAIR amt of $$ to it. I thought you meant not much $$, anywayz you can't use that exact turbo set-up, but you can get a SR20DET turboed engine and swap it in... give you about 70whp and go from there. Can get them for around $3000 I believe but would cost maybe another $2000+for equipment needed with it, so......

[Mrcoilover]

For more show you could get the IMPUL body kit straight from Japan for $3250. Looks very good but pricy. Or a stillen front spoiler for about $330. And there is Wings West fron lip for $182

[Nissan_2.0]

Actually, the HS turbo for the SE-R's SR20 should fit your G with a little bit of fabbed piping
I finally got a hold of a HS guy that told me the turbo would fit my P10 with little modification
it shouldnt be too hard, and if youre that devoted, you could prolly drive down to HotShot HQ and have em do it for you--for a lil bit extra, id imagine

[BIGbungy]

i have returned...yay. Thank you everyone for the advice, ill let you all know on the progress.