|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Off-Topic Talk about anything other than cars. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
06-23-2004, 11:14 PM
|
||||
|
||||
opening the space for the FMIC
figured i would just start a new thread
 OK... here it is! i removed the bumper cover and put it up onto 2 stools. i then measured 3/8" of a cut around the whole bottom part [lower mouth if you will]. then i got a Dremel and with a large cutting disc i cut the top corners [picture a sideways D with the stright part up] all the way down to the front of the cover. this was all done from the back side of the cover, cutting the inside [unseen] part. then i flipped it over and cut the lip out from the outside to the inside. after all that was cut away, i went back with the sander tool for the dremel and evened out everything. fairly simple. i did have on safty glasses [i took a disintegrated cutting disc to the cheek!] and a real painters mask on [fumes are eyewatering!] overall about 2 hours taking my sweet ass time and tweeking on the clean-up sanding. i did lose one of my fog light covers on the freeway because i didn't make sure it was secure after i put the cover back on... lol. i might just say fuck them and dremel out those holes too. who knows and now the pics! [that is my bro Jesse helping measure it out] and they are all from my cell phone [i lost the batt charger to my real cam  ]look ma! no bumper!  measureing the cut!  back on!  just a few minutes ago!  you can see the return pipe for the GReddy... it looks sooo much better and WAY more agressive! 
|
|
#2
06-24-2004, 12:25 AM
|
||||
|
||||
|
Re: opening the space for the FMIC
As i said before, it looks fucking evil!! I LOVE IT!!
__________________
 - Its Micheal Jackson! and his black again!!! YAY!!!!!!LandoAWD - My rolemodel!! why? because his a bad ass! beache..! and he will kick ur A$$!!  Originally Posted by Delerious93integra and if DSM's are so great.. then why doesn't everyone own one? ^^^  WOW!!! ^^^
|
|
#3
06-24-2004, 12:33 AM
|
||||
|
||||
|
Re: opening the space for the FMIC
looks good vince... nice job done on the fabrication!
|
|
#4
06-24-2004, 08:24 AM
|
|||
|
|||
|
Re: opening the space for the FMIC
Sweet. And I know what you mean about the eyewatering fumes, thats no joke
__________________
Kevin Jewer RWD Talon - 7.92 at 180 Mightymax - 10.7 at 125
|
|
#5
06-24-2004, 10:10 AM
|
||||
|
||||
|
Re: opening the space for the FMIC
jesse james!?
__________________
 06 Charger SRT-8 black.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
