|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Suspension setups, shocks, springs, tires, handling. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
05-16-2001, 01:10 AM
|
||||
|
||||
|
I'm curious if anyone has found an alternative to the Stillen STB. I'm trying to save up enough for the stillen one, but would much rather find a cheaper alternative. Custom make one and borrow someone's TIG welder?
Also I've seen pictures of a rear bar for a Primera, but havn't ben able to find info on the car. Again, does anyone know of a company that makes this bar, even if it's overseas that is fine, cause i could always get it shipped. I'm assuming the rear bar is not very common? My car is plenty stiff right now, it's suprising how well it handles with the Ground Controls, but i figure they can't hurt, except maybe the wallet, the chassis is already stiff as it is, but i'm sure they will still help. Thanks BTW, here is a picture of my car 
__________________
Justin McClanahan 95 G20 15.4 @ 91.4mph (2.4 60ft  )143.7whp and 131.4 ft.lbs Primera (10:1) Intake Cam, HS CAI, HS Header, UR Pullies, 19* Timing, ACT, Lightened Stock Flywheel, GC/AGX, Pacesetter Short Shifter, and more stuff... 
|
|
#2
06-03-2001, 09:43 PM
|
||||
|
||||
|
hey justin, nice g!! as far as the strut tower bar, i've heard that the stb from courtesy nissan for an altima works. i've only heard this though.. and if it does work, it's a lot cheaper than the stillen bar. i thought GAB makes one too, maybe i'm mistaken. i used to have a corksport strut tower bar on my escort and it helped greatly. stiffens the front end right up and helps point the car where you want it to go right away, very responsive.
|
|
#3
06-03-2001, 09:48 PM
|
||||
|
||||
|
cusco makes one for our cars. not sure of the price but im sure nopi has it.
__________________
Back in my day we didn't have all this fancy birth control shit; like pulling out.  :flamer: :monkeypis :bathroom::rocket: :badass:
|
|
#4
06-03-2001, 10:14 PM
|
||||
|
||||
|
Quote:
__________________
Justin McClanahan 95 G20 15.4 @ 91.4mph (2.4 60ft )143.7whp and 131.4 ft.lbs Primera (10:1) Intake Cam, HS CAI, HS Header, UR Pullies, 19* Timing, ACT, Lightened Stock Flywheel, GC/AGX, Pacesetter Short Shifter, and more stuff...
|
|
#5
06-07-2001, 08:55 PM
|
|||
|
|||
The Courtesy STB will work and it costs less than $75. They will know what part you need if you ask for the G20 bar.
pics of STB can be found here http://www.conecrazy.com/project-g20/engine.html
|
|
#6
06-07-2001, 09:05 PM
|
||||
|
||||
|
Really? Cool, I didn't know Courtesy made a STB for my car... I'll have to see if it'll fit on the lowport motor (damn intake manifold). Ok cool, I'll give them a call first thing tomorrow morning. thanks
__________________
Justin McClanahan 95 G20 15.4 @ 91.4mph (2.4 60ft )143.7whp and 131.4 ft.lbs Primera (10:1) Intake Cam, HS CAI, HS Header, UR Pullies, 19* Timing, ACT, Lightened Stock Flywheel, GC/AGX, Pacesetter Short Shifter, and more stuff...
|
|
#7
10-05-2001, 02:08 AM
|
|||
|
|||
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
