|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Performance Discussion about performance modifications and issues. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
06-18-2004, 06:49 PM
|
|||
|
|||
|
is it possible
hello
I searched but could not find a yes or no answer. its probably no but dose anyone know if its possible to use the rb25de transmission with the rb36dett. any help is greatly appreciated. thanx 
|
|
#2
06-18-2004, 08:46 PM
|
||||
|
||||
|
Re: is it possible
RB36DETT... What the hell.
Is the cylinder wall thick enough for that? -Wes
__________________
-2000 PY Acura Integra Type-R #686 - WhoRe -1997 EGP Honda Prelude Type-SH - Daily driver R.I.P Hypsi87:Andy Filson 
|
|
#3
06-18-2004, 08:51 PM
|
|||
|
|||
|
Re: is it possible
sorry ment 26
|
|
#4
06-18-2004, 10:48 PM
|
||||
|
||||
|
Re: is it possible
Ah.
Not sure why you would want to... You've gotta think gear ratios. If your ratios are set for a very low HorsePower setting... And you slap on a 300+hp engine, you'll either burn out your gearbox, or run out of RPM very soon. What Im saying is that it would be a pointless project, to me at least. Maybe some of these guys would disagree with me... Any opinions? -Wes
__________________
-2000 PY Acura Integra Type-R #686 - WhoRe -1997 EGP Honda Prelude Type-SH - Daily driver R.I.P Hypsi87:Andy Filson
|
|
#5
06-18-2004, 11:56 PM
|
||||
|
||||
|
It would be able to be put on, depending on the clutch. The early R32 RB26s used a push clutch like the others, but the late R32 RB26s and up use a pull type clutch. So you may have to change the type of clutch.
That just answers the question of it being possible. Now is it something you want to do, NO! The only transmission other then the RB26's that you would really want to consider is the RB25DET's, that's the trans required for the RWD swap when the RB26 is dropped into an S13/S14. The RB25DE trans isn't geared to use the power correctly, and the power of even a stock GTR and going to quickly wear it out. Not to mention they usually reinforce the casing of the turbo transmissions.
__________________
1990 Skyline GTE/S-t 4 Door Updated 6 Mar Swapped out RB20E with RB20DET Trans converted from Auto to 5-Speed... Now with SR20DET 5-Speed Installed Type M 5-lugs and brakes, R32 GTR rims and 2-Dr rear end (Tail lights & bumper) 1994 Isuzu AMU US Spec Amigo with JDM Isuzu MU (Mysterious Utility, as it's called in Japan) nurf bars and hatchback style hardtop.
|
|
#6
06-19-2004, 02:15 PM
|
|||
|
|||
|
Re: is it possible
ok thanks for the help, i guess its a no
|
|
#7
06-19-2004, 09:14 PM
|
||||
|
||||
|
Re: Re: is it possible
Quote:
The clutch isn't super important as even a good single plate with 2150 lb clamp and a 5 puch ceramic/ceramic paddle clutch will hold up to about 500hp. It is the same clutch I'm using and is one of the cheaper price units that I know of. I can launch my GTR at 7,500rpms with no slippage yet is nice enough to drive in heavy traffic, hill starts, and has a good life. I've gotten just over 30,000 kms (18.600) miles out of mine, and have made over 70 hard launches and is still going though getting a bit tired now.
__________________
You don't own a Skyline, then don't cry to me about it! 1992 Silver R32 GTR tickled to 450hp. - Sold when I left NZ in 2004 Arguing on the Internet is like competing in the special olympics. Even if you win, you're still retarded. Never confuse kindess with weakness. AF user guidelines, Please remember to abide by them  
|
|
#8
06-20-2004, 08:22 AM
|
||||
|
||||
|
Re: is it possible
Ok so we've all decided it is possible...
Now would it be smart to do? In your opinion Razor? -Wes
__________________
-2000 PY Acura Integra Type-R #686 - WhoRe -1997 EGP Honda Prelude Type-SH - Daily driver R.I.P Hypsi87:Andy Filson
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
